Graco 103473 Wire Tie
5/5
(1 review)
$36.70
Available to Order
The Graco 103473 Wire Tie is an OEM strap designed to organize and secure wiring or small hoses on multiple Graco sprayers, ensuring a clean and safe setup.
- Durable OEM-grade construction
- Fits a wide range of Graco sprayers and texture machines
- Prevents wire abrasion and tangling
- Easy to install and replace
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
OEM Tie Wire Strap for Clean Cable Management
The Graco 103473 Wire Tie (also referenced as Tie Wire Strap) is an OEM securing strap used to neatly bundle and route wires and small hoses on a wide range of Graco sprayers and rigs. It helps reduce chafing, snag points, and clutter around control wiring and hose paths.
Compatible Machines
The following models list this part in their breakdowns or parts references. Always confirm with your unit’s specific manual before ordering.
- 220-726 — Lo Boy Paint Sprayer
- 223-636 — Pro 301 Airless Paint Sprayer
- 223-637 — Pro 501 Airless Paint Sprayer
- 223-638 — Pro 701 Airless Paint Sprayer
- 224-604 — Pro 301 Airless Paint Sprayer
- HydraMax Sprayer (Direct Immersion)
- 231-051 — Lo Boy Paint Sprayer
- 231-133 — Gas Powered Airless Line Driver
- 231-138 — EM 390 Paint Sprayer
- 231-141 — Gas Powered Airless Line Driver
- 231-315 — Ultra 500 Airless Paint Sprayer
- 231-353 — 390 Airless Paint Sprayer
- 246186 — Interior Texture Sprayer
- 246418 — 330 Airless Gas Power Paint Sprayer
- 246737 — 230E Airless Paint Sprayer
- 254973 — Interior Texture Sprayer
- 254974 — Interior Texture Sprayer
- 254975 — Interior Texture Sprayer
- 257030 — GTX 2000EX Paint Sprayer
- HydraMax 300 — 30-GAL Suction
- HydraMax 350 — 30-GAL Suction
- GMAX 3900 — Hi-Boy Airless Paint Sprayer
- ST Pro 455 — Airless Sprayer
- GMAX 5900 — Lo-Boy Airless (w/Gun & Hose)
- GMAX 5900HD — Hi-Boy Airless Paint Sprayer
- 826005 — System ProCart Paint Sprayer
Key Details
| Part Number | 103473 |
|---|---|
| Item Name | Wire Tie / Tie Wire Strap |
| Function | Secures and organizes wiring and small hoses on sprayers/rigs to prevent abrasion and clutter. |
| Typical Placement | Harness runs, control box areas, frame routing points, and hose guides. |
| Dimensions (approx.) | Length ~8 in; width ~0.30 in; profile ~0.20 in. |
| What’s Included | One OEM Graco 103473 strap. |
| Notes | General-use securing strap; some models may use multiple straps. Verify quantity and locations in your manual. |
Why Choose This OEM Strap
- OEM fit and finish for consistent retention and routing.
- Protects wiring by reducing abrasion and vibration-induced wear.
- Quick install—simple, tool-light replacement in most locations.
- Versatile use across numerous Graco sprayers and texture machines.
Frequently Asked Questions
No—it's a general-use Tie Wire Strap used across many Graco machines to secure wiring and small hoses. Always confirm placement/quantity in your unit’s manual.
Quantity varies by model and routing path. Check the parts diagram for your exact sprayer; many units use multiple 103473 straps in different locations.
A generic tie may work temporarily, but the OEM Graco 103473 ensures proper length, retention, and durability in service environments typical of airless sprayers and texture rigs.
Common locations include control box wiring bundles, frame routing points, engine/battery harness routes (on gas units), and hose guides near the pump/manifold.
Route wiring with adequate slack for vibration and service loops. Avoid sharp edges, verify no pinch points, and trim tie ends cleanly after securing.
5
1 review
1
0%
2
0%
3
0%
4
0%
5
100%
J
Jennifer W.
This was a straightforward swap - for the 103473 Wire Tie (Part #103473) and the machine was back up and running the same day. Good value for a genuine Graco part.
