Graco 104137 Screw Binder
$5.74
In Stock
Genuine Graco 104137 — a Screw, Binder 10-24 × 3/8 used to secure components in select pump/air-motor assemblies. Keep your sprayer aligned and reliable with the exact spec fastener.
- Part #: 104137
- Spec: #10-24 thread, 3/8 in length
- Role: Fastener for pump/air-motor assembly integrity
- Confirmed Fit: Graco Model 954088 (Series A)
- Tip: Verify your model’s parts list for 104137 before ordering
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Specifications
Compatible Machines
Confirm your machine’s parts list before ordering. This part is confirmed in the manufacturer documentation for the model below.
- Graco Model 954088 (Series A) — President 10:1 Air Spray System pump assembly (uses 104137).
Key Details
Graco 104137 is a Screw, Binder used in select Graco pump/air-motor assemblies. It secures components within the assembly and should be replaced with the exact specification to ensure proper fit.
| Spec | Value |
|---|---|
| Part Number | 104137 |
| Item Name | Screw, Binder |
| Thread Size | #10-24 (UNC) |
| Length | 3/8 in |
| Typical Use | Hardware fastener within pump/air-motor assembly; maintains assembly integrity against vibration. |
| Notes | Use genuine parts and follow your model’s service manual for torque and assembly sequence. |
Why choose the original part?
- Correct 10-24 × 3/8 specification for assemblies that call for 104137.
- Helps keep pump/motor components properly aligned and secured.
- Supports durability and reliable operation when installed per the manual.
Installation Tips
- Power down and depressurize equipment fully before service.
- Match the thread and length (#10-24 × 3/8) to your parts list.
- Tighten evenly; if your manual specifies torque, use a calibrated tool.
- After assembly, run a quick test at low pressure to confirm stability.
| Frequently Asked Questions |
|---|
A binder screw secures components within the pump/air-motor assembly. It doesn’t carry fluid; it maintains mechanical stability and alignment.
Only if their parts list explicitly calls for 104137 (or the same pump assembly). Check your exact model’s manual/parts list before purchasing.
#10-24 thread (UNC), 3/8 inch length — designated by Graco as Screw, Binder 10-24 × 3/8.
Torque can vary by model and assembly. Refer to your machine’s service manual for the correct torque and tightening sequence.
No reviews yet. Be the first to review this product!
