Graco 17E585 Ultra Max II 1095 ProContractor Series Electric Airless Sprayer
$7,417.50
$10,750.00
Save 31%
Available to Order
Graco 17E585 Ultra Max II 1095 ProContractor delivers powerful, consistent performance for large-scale painting projects. Designed for professional contractors needing reliability, speed, and long service life.
- Max Pressure: 3300 PSI
- Max Flow: 1.20 GPM
- Motor: 2.4 HP Brushless DC
- Pump: Endurance Vortex MaxLife
- SmartControl 4.0 for consistent spray pattern
- ProConnect 2 quick-change pump system
- QuikReel hose management up to 300 ft
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview of the Ultra Max II 1095 ProContractor (Graco 17E585)
Compatible Equipment & Setups
- Graco Contractor PC and compatible airless spray guns (RAC X™ / LP guard & tips)
- RAC X / LP tips within ratings: up to 0.035 (single-gun), ~0.027 (two-gun), ~0.021 (three-gun)
- BlueMax II hoses (commonly 1/4" × 50 ft; can be combined/managed on QuikReel up to long runs)
- Easy-Out pump filters / strainers appropriate to the material (e.g., 60–100 mesh)
- ProConnect 2 drop-in Endurance Vortex MaxLife pump module for quick field replacement
- Approved generators / power sources (typically 120V, ~15A; jobsite generators ~5,000W recommended)
- Single, dual, or multi-gun manifolds within the unit’s flow/pressure limits
Key Specifications
| Model | Graco 17E585 Ultra Max II 1095 ProContractor |
|---|---|
| Pump | Endurance Vortex MaxLife (rotating-rod design) with ProConnect 2 rapid swap |
| Max Pressure | 3300 psi (227 bar) |
| Max Flow | Approx. 1.20 GPM (4.5 L/min) |
| Tip Capacity | Single gun up to 0.035"; two guns to ~0.027"; three guns to ~0.021" (material dependent) |
| Motor | Brushless DC “MaxPower” |
| Control | SmartControl 4.0 w/ pressure monitoring; BlueLink job & sprayer telemetry |
| Hose Management | QuikReel integrated reel for fast deploy/rewind |
| Cleaning | FastFlush high-flow cleanout; Easy-Out filter |
| Power | 120V, ~15A (check regional spec); generator ~5,000W recommended for jobsite use |
What It Is
The Graco 17E585 is a high-output, professional electric airless sprayer designed for large-scale residential, commercial, and light industrial coatings. With SmartControl 4.0, a durable Endurance Vortex MaxLife pump, and ProConnect 2 for tool-free pump swaps, it’s built to run multiple guns, long hose lengths, and heavy daily use.
Typical In-The-Box Kit
- Contractor PC (or equivalent) airless spray gun with RAC X™ guard
- Common starter RAC X LP tip (e.g., 517) — actual tip may vary by region/kit
- BlueMax II 1/4" × 50 ft hose (plus whip hose in some kits)
- Integrated QuikReel hose management
- Easy-Out pump filter & inlet strainer
- User manual & quick-start guide
Suitable Materials & Applications
- Interior/exterior paints, primers, acrylics, elastomerics (verify tip/filter/mesh)
- Block-fillers and high-build coatings within rated tip sizes and flow
- Long-run multi-gun production on large residential & commercial projects
Frequently Asked Questions
For a single gun, up to 0.035" is typical. For two guns, about 0.027", and for three guns, about 0.021". Always match the tip and filter to the coating and follow Graco’s recommendations.
Yes, it can run two or three guns within its flow/pressure limits. Use the appropriate manifolds, hoses, and tip sizes, and verify atomization quality during setup.
The unit is typically 120V ~15A. For jobsite portability, a generator around 5,000W is commonly recommended. Always check your regional specification plate and follow Graco’s power guidelines.
It uses the Endurance Vortex MaxLife pump with ProConnect 2 for tool-free, rapid pump swaps—ideal for minimizing downtime on site.
Most architectural coatings—primers, acrylics, elastomerics, block-fillers—provided you select the correct tip size, mesh filtration, and maintain pressures within spec. Always consult coating technical data sheets.
No reviews yet. Be the first to review this product!
