Overview & Key Features
Graco 17E586 Ultra Max II 1095 IronMan Series Electric Airless Sprayer is a heavy-duty, hi-boy cart sprayer designed for large residential and commercial projects. The IronMan trim emphasizes durability and uptime with rugged wheels, crush-proof inlet strainer, and the Endurance Vortex MaxLife Extreme pump family, paired with SmartControl 4.0 pressure management and BlueLink connectivity for job tracking.
Compatible Machines
- This product is a complete electric airless sprayer (a “machine”). It does not fit into other machines.
Compatible Parts & Accessories (for 17E586 / 1095 platform)
- Endurance Vortex MaxLife Extreme Pump family (1095 platform)
- Contractor PC / RAC X–compatible spray guns
- RAC X tips (e.g., LP/FF/HD) and RAC X tip guard
- BlueMax II airless hoses (1/4" and 3/8"), whip hoses, swivels
- Easy-Out manifold & gun filters (mesh as material requires)
- Inlet strainers, PumpArmor, maintenance kits, and pump repair kits
Specifications
| Maximum Flow | ~ 1.20 GPM (4.5 L/min) |
| Maximum Pressure | 3300 psi (227 bar) |
| Max Tip Size | Up to 0.035" (single gun); up to ~0.027" (two guns, material dependent) |
| Motor | 2.4 hp brushless DC |
| Hose Capacity | Supports up to ~400 ft total hose (setup dependent) |
| Control & Connectivity | SmartControl 4.0; BlueLink job/sprayer telemetry |
| Cart | Hi-boy frame with flat-proof wheels and durable lift points |
Typical In-Box Contents*
- Ultra Max II 1095 IronMan sprayer on hi-boy cart
- Contractor PC gun with RAC X guard
- RAC X LP517 tip (or comparable, region/kit dependent)
- BlueMax II 1/4" x 50 ft hose
- Inlet strainer, filters, PumpArmor
- Quick start / documentation
*Kit contents may vary by region or bundle. Always check the “Included” tab on your exact SKU.
Best For
- Large residential repaints and new construction
- Commercial interiors/exteriors and multi-unit projects
- Medium-to-high viscosity coatings (per tip/mesh guidance): primers, acrylics, elastomerics, block fillers
- Single- or two-gun operation (material and tip sizes permitting)
Buyer Notes
- IronMan trim prioritizes durability and uptime; ProContractor trim adds productivity extras (e.g., on-board hose wrap, toolbox) while sharing the core 1095 performance.
- Select RAC X tips by material & desired finish; stay within the sprayer’s max tip rating.
- Use proper filtration (inlet/manifold/gun) to minimize wear and improve finish quality.
Frequently Asked Questions
No—this is a complete sprayer (machine). Instead, choose compatible parts & accessories listed above (tips, guns, hoses, filters, pump family) for the 1095 platform.
Follow the coating TDS and stay within the sprayer’s rating (up to 0.035" single-gun). For heavy materials, consider larger orifice RAC X LP/HD tips, proper mesh filters, and short, appropriately sized hose for minimal pressure drop.
Yes, the 1095 platform supports two-gun operation with appropriately sized tips (commonly up to ~0.027" each) and material-appropriate filters. Expect reduced max orifice per gun when running dual lines.
Up to ~400 ft total hose is typical. Use 3/8" as a main line for long runs, step down to 1/4" and a short whip to the gun, and keep filters/tips matched to the material.
Strain/flush coatings, use the correct mesh filters, relieve pressure when idle, store with PumpArmor, and follow the Endurance pump service intervals. Replace wear parts proactively for consistent output.
