Product Overview: Housing Filter Part 104441
The Housing, Filter – part 104441 from Graco is a genuine OEM component designed to provide efficient filtration in high-pressure fluid handling systems. This durable build helps protect downstream equipment, reduce maintenance intervals and ensure consistent system performance. With its high flow capacity and reliable construction, it is ideal for demanding applications.
Compatible Machines
- Graco 210 090 Medium-Volume Filter System
- Graco 210 091 Medium-Volume Filter System
- Graco 210 092 Medium-Volume Filter System
- Graco Husky Series Pumps (when configured with filter housing 104441)
- Graco Transfer & Fluid-Handling Systems compatible with ¾″-16 UNF inlet/outlet filter housings
Key Specifications & Features
| Part Number |
104441 |
| Maximum Working Pressure |
3 000 psi (210 bar) :contentReference[oaicite:1]{index=1} |
| Flow Capacity |
10 gpm (38 L/min) :contentReference[oaicite:2]{index=2} |
| Filter Area |
36 sq in (232 cm²) :contentReference[oaicite:3]{index=3} |
| Inlet/Outlet Thread |
¾″ NPT(f) for inlet/outlet & ¾″-16 UNF(f) drain port :contentReference[oaicite:4]{index=4} |
| Materials Wetted |
Iron, Steel, Fluoroelastomer, Stainless Steel :contentReference[oaicite:5]{index=5} |
Why Choose This Filter Housing?
Here are some of the benefits you’ll get by installing the 104441 housing filter:
- Improved system protection: Prevents contaminant ingress into pumps and fluid circuits.
- High performance: Rated for 3 000 psi and flows up to 10 gpm—suitable for heavy-duty operations.
- OEM compatibility: Genuine Graco part ensures correct fit, performance and warranty basis.
- Ease of service: Designed for rapid maintenance and replacement of filter elements.
Installation & Maintenance Tips
To get the best value from your filter housing, follow these practical tips:
- Always relieve system pressure before installing or servicing the filter housing to avoid injury. :contentReference[oaicite:6]{index=6}
- Match the mesh size of the filter element to the fluid system’s requirements (e.g., 60 mesh for heavier coatings, 200 mesh for finer filtration). :contentReference[oaicite:7]{index=7}
- Ensure proper thread compatibility—¾″ NPT inbound/outbound for the main fluid connection, and drain port uses ¾″-16 UNF.
- Keep a spare bowl, spring, and element on hand to minimize downtime during maintenance. :contentReference[oaicite:8]{index=8}
- Inspect O-rings and backups during each service interval—replace if worn or damaged to prevent leaks. :contentReference[oaicite:9]{index=9}
Frequently Asked Questions
The housing supports several element mesh sizes including 60 mesh (250 micron), 100 mesh (149 micron) and 200 mesh (74 micron) for different fluid types. :contentReference[oaicite:10]{index=10}
While the housing is built for high-pressure systems, it must match the system's connection threads, pressure rating and flow requirements. Confirm that your pump system uses ¾″ NPT inlet/outlet and doesn’t exceed 3 000 psi if you plan to install it.
Service intervals depend on your application and fluid contamination. As a general guideline, inspect every 250-500 hours or sooner if you notice pressure drop across the filter. Always keep a spare bowl and element on hand to reduce downtime.
