Graco 24V540 Valve Module MHH-18T-9S-6T

Valve Module MHH-18T-9S-6T – Graco Part 24V540

Compatible Systems

• Graco Trabon progressive lubrication components
• Equipment whose Graco parts list calls for part number 24V540

Graco part number 24V540 is the Graco 24V540 Valve Module MHH-18T-9S-6T, a control module. A control module is an electronic part that handles control, display or communication functions in the system. Trabon is a series-progressive lubrication line, including modular divider valves, that Graco lists under Vehicle Service and Automatic Lubrication.

About the Trabon progressive lubrication components

A divider valve assembly is an inlet section, valve sections and an end section held together by tie rods. While lubricant is supplied under pressure to the inlet the valve pistons cycle progressively; if flow stops the pistons stop and resume at the same point in the cycle. Graco lists uses such as: Metering oil or grease to multiple lube points from a single pump in an automatic lubrication system; Machinery lubrication with Trabon Series-Flo divider valves driven by a Lubemaster pump. Trabon divider valve assemblies dispense lubricant progressively from a single supply. If lubricant flow stops, the divider valve pistons stop and resume at the same point in the cycle when flow returns. Divider valve sections are stamped with the valve style, the discharge per stroke, and the number of outlets.

Before You Order

• Check the connector type and pin count against the mating part, and the sensor or signal type against the control.
• Disconnect power before changing any electrical part.
• Have your equipment model, and the serial number if available, ready if you contact us for help.

Service Notes

• Follow the pressure relief and lock-out steps in your Graco manual before servicing any pump, valve, applicator or electrical part.

Frequently Asked Questions