Buy an HVLP Paint Sprayer in Augusta
Authentic Graco HVLP equipment where the coat has to lay down flawlessly, shipped direct to Augusta with no dealer wait. Complete turbine systems, air-assisted rigs and fine finish guns in stock.
Delivering across Augusta
5 ZIP codes served:
04330, 04332, 04333, 04336, 04338
−27%
−27%
−27%
−27%
−27%
−27%
−16%
Which Fine Finish Setup Fits Augusta Work?
You choose HVLP when the surface will be looked at closely. Low pressure means the material arrives softly and lays down instead of bouncing off. Wrong tool for a building exterior; right tool for cabinetry. Here is how the ranges divide for finishers across Augusta and the wider Maine area.
Turbine HVLP
FinishPro 7.0–9.5. Portable systems for on-site fine finish.
Air-Assisted
FinishPro II 395/595. Airless output with a softer, finer break-up.
Edge II Guns
For existing turbines. Lacquers, stains and clear coats.
AirPro & Razor
Shop and booth guns. Bench and booth work with compressed air.
Fine finish equipment we ship
Serving Augusta and the wider Maine area
- FinishPro HVLP 7.0 / 9.0 / 9.5 — turbine systems
- FinishPro II 395 / 595 PC — air-assisted airless
- Edge II & Edge II Plus — HVLP guns
- AirPro & AirPro EFX — shop and booth guns
- Finex Air Spray — gravity and pressure feed
- Fine Finish Tips — sized to your coating
Not sure which setup?
Tell us the coating and what you are finishing and we will match turbine or air-assisted to it — the material's body decides which will atomise it properly.
+1 713-931-4102 or browse HVLP guns →We also ship to 8 nearby Maine communities
Westbrook, South-portland, Lewiston, Scarborough, Windham, Bangor, Sanford, Waterville
Buying HVLP in Augusta — Common Questions
Straight answers for finishers and cabinet shops in Augusta, Maine.
Do you deliver HVLP sprayers to Augusta?
Yes — we ship to all 5 Augusta ZIP codes, including 04330, and across Maine. Order before 1 PM CST and it leaves that day.
What does HVLP actually give me over airless?
Far higher transfer efficiency and a finer finish. You lose less to bounce-back and drift. You give up coverage rate for finish quality.
Turbine HVLP or air-assisted airless?
Turbine for portability and the finest finish; air-assisted for speed on volume. A FinishPro HVLP turbine is self-contained and needs no compressor. A FinishPro II air-assisted rig moves far more material per hour while still breaking it up finely. Cabinet shops running daily production usually want air-assisted.
Do I need to thin the material?
More often than with airless, and always to the coating maker's limits. A smaller turbine will struggle with heavier material. Never thin past what the data sheet allows.
Can I use an HVLP gun on my existing setup?
It comes down to CFM and pressure. Turbine guns are matched to their turbine and are not interchangeable with compressed air guns. An undersized compressor starves a shop gun and ruins the pattern. Call and we will match it properly.
Can I get parts for the turbine later?
Yes — turbine repair kits, filters, needles and caps are stocked. Keeping the intake filter clean is the single biggest thing for turbine life. Everything is factory-new with warranty support.
HVLP & Fine Finish Equipment for Augusta, Maine
Whether you're spray-painting walls, ceilings, or exterior surfaces, Sprayersandparts.com provides Augusta, Maine customers with authentic Graco equipment and parts. Orders to Augusta (04330, 04332, 04333, 04336, and more) ship same or next business day. From Graco Magnum X5 homeowner sprayers to Ultra Max II 1095 Hi-Boy contractor units, Sprayersandparts.com covers the full product range. Parts for every model — pump kits, drive housing assemblies, pressure relief valves, tip filters, and gun components — are in stock and ready to ship. We back every order with easy returns and parts-matching support. Shopping with Sprayersandparts.com means access to genuine Graco quality, fast shipping to Augusta, and real help when you need it.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 5 Augusta ZIP codes (04330, 04332, 04333, 04336, 04338). Order by 1 PM CST and it ships same day, tracked.
The practical point: on fine finish work the material you save in overspray adds up faster than the equipment costs — and less sanding between coats saves the labour too.
Serving Finishers Across Maine
For Augusta, Maine painting contractors, equipment reliability directly affects project schedules and profitability. A worn pump packing, a clogged filter, or a damaged spray tip can stop a crew in its tracks. Stocking a few key Graco OEM replacement parts prevents that scenario. Painters in Augusta, Maine can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
From small residential jobs to full commercial repaints, Maine contractors source Graco parts through Sprayers and Parts. We deliver to 15 cities statewide, from Auburn, Augusta, Bangor and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.
Every Maine order ships from the same warehouse on the same schedule.
Working outside Augusta? Browse every Maine city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Augusta.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.