Buy an HVLP Paint Sprayer in Murray
Factory-original FinishPro HVLP rigs built for finish-quality work, dispatched to Murray without a distributor in the middle. FinishPro 7.0, 9.0 and 9.5 turbines, plus Edge II and AirPro guns.
Delivering across Murray
7 ZIP codes served:
84047, 84107, 84117, 84121, 84123, 84141, 84157
−27%
−27%
−27%
−27%
−27%
−27%
−16%
Which Fine Finish Setup Fits Murray Work?
HVLP is about finish quality, not coverage rate. Gentle delivery gives you flow-out rather than dry spray. It will not repaint a warehouse, but it will finish a kitchen properly. Here is how the ranges divide for finishers across Murray and the wider Utah area.
Turbine HVLP
FinishPro 7.0–9.5. Everything in one unit, plug in and spray.
Air-Assisted
FinishPro II 395/595. Production speed without airless overspray.
Edge II Guns
For existing turbines. Cabinets, trim, doors and millwork.
AirPro & Razor
Shop and booth guns. Gravity, siphon and pressure feed.
Fine finish equipment we ship
Serving Murray and the wider Utah area
- FinishPro HVLP 7.0 / 9.0 / 9.5 — turbine systems
- FinishPro II 395 / 595 PC — air-assisted airless
- Edge II & Edge II Plus — HVLP guns
- AirPro & AirPro EFX — shop and booth guns
- Finex Air Spray — gravity and pressure feed
- Fine Finish Tips — sized to your coating
Not sure which setup?
Describe the finish you need and the volume and we will match turbine or air-assisted to it — viscosity decides more than anything else here.
+1 713-931-4102 or browse HVLP guns →We also ship to 8 nearby Utah communities
Cottonwood-heights, Saratoga-springs, Lehi, Provo, South-ogden, Payson, West-valley-city, Tooele
Buying HVLP in Murray — Common Questions
Straight answers for finishers and cabinet shops in Murray, Utah.
Do you deliver HVLP sprayers to Murray?
Yes — we ship to all 7 Murray ZIP codes, including 84047, and across Utah. Same-day dispatch applies to orders in before 1 PM CST.
What does HVLP actually give me over airless?
Better control, less waste, and a finish that needs less sanding. More of the material ends up on the workpiece instead of in the air. In exchange it is slower over large surfaces.
Turbine HVLP or air-assisted airless?
Small runs and site work favour turbine; production shops favour air-assisted. A FinishPro HVLP turbine is self-contained and needs no compressor. A FinishPro II air-assisted rig moves far more material per hour while still breaking it up finely. If you are finishing a kitchen a week, the turbine is enough.
Do I need to thin the material?
Usually some thinning, depending on the coating and the turbine stage count. Heavier body needs more turbine stages or a larger needle and cap. Always follow the coating manufacturer's thinning limits — over-thinning causes runs and poor build.
Can I use an HVLP gun on my existing setup?
Depends entirely on your air source. The two systems deliver air very differently. Compressed-air guns like AirPro need enough CFM or they will not atomise properly. Send the details and we will check compatibility.
Can I get parts for the turbine later?
Yes, including turbine rebuild kits and gun wear parts. Air filters matter more than people expect on a turbine. All units carry the genuine Graco warranty.
HVLP & Fine Finish Equipment for Murray, Utah
Painting professionals in Murray, Utah know that downtime costs money. Sprayersandparts.com keeps your crew moving by delivering genuine Graco airless sprayer parts to the Murray area (84047, 84107, 84117, 84121, and more) with same-business-day processing. We supply everything from Graco Magnum replacement tips and filters to complete Ultra Max II 1095 piston pump assemblies. Our stock also includes Graco spray hoses in 1/4" and 3/8" diameters, ranging from 25 ft to 100 ft, plus all standard Graco gun and hose fittings. Your Graco sprayer investment is protected when you use OEM parts from Sprayersandparts.com. We ship to Murray daily, offer straightforward returns, and provide part-matching assistance so you order with confidence.
We keep the first-to-fail items on the shelf — packings, filters, spray tips and pressure controls — and ship to all 7 Murray ZIP codes (84047, 84107, 84117, 84121, 84123, 84141, 84157). Order by 1 PM CST and it ships same day, tracked.
Worth knowing: what you do not lose to overspray is money you keep — and the finish needs far less sanding afterwards.
Serving Finishers Across Utah
Airless painting in Murray, Utah demands reliable equipment. Graco's lineup — from the compact Magnum X5 to the high-volume Ultra Max II 1095 — covers every application scale, and keeping these sprayers running requires genuine OEM parts, not substitutes that can wear prematurely or fail mid-job. For Murray, Utah painting professionals, Sprayersandparts.com is the straightforward solution: genuine Graco parts, a full sprayer catalog, fast shipping, and support when you need help identifying what your sprayer needs.
Send your sprayer model and we will verify fitment before you buy. We stock centrally rather than locally, which is why our inventory runs deeper than a regional dealer.
From small residential jobs to full commercial repaints, Utah contractors source Graco parts through Sprayers and Parts. Orders go out daily to 48 Utah locations, including American Fork, Bountiful, Brigham City.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.
Coverage is identical across Utah — same inventory, same cut-off.
Working outside Murray? Browse every Utah city we ship to to find your area.
Find Us on Google
View verified reviews and how to reach us on our Google Business Profile — then order online for delivery to Murray.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.