-1.jpeg)
Explore Our Full Line of Professional-Grade Graco RentalPro 210PC Control Electric Airless Sprayers Parts
RentalPro 210PC Control is the smallest member of Graco’s contractor-duty family, yet it shares DNA with 390 PC, 395 PC Pro and even the 650 Pro. That means a single box of genuine parts can keep half a dozen rigs spraying. Whether you manage a rental fleet or run a two-truck repaint team, stocking OEM valves, packings, boards and Easy-Out™ filters guarantees the sprayer you hand to the next crew fires up on the first trigger pull and delivers a dead-flat fan until the last gallon is gone. At SprayersAndParts we carry every serialized component and graco electric airless sprayers—from SmartControl™ pressure sensors to V-Max Blue™ hybrid packings—heat-bagged, torque-tagged and bench-tested before we print your label.
The key components of Graco RentalPro 210PC Control Electric Airless Sprayer are made to last, work well, and be simple to use in professional painting applications. Its central component, the Control Box, controls the electronic parts, enabling seamless operation and accurate changes to meet various coating specifications. A crucial component that allows for precise spray pressure adjustments for the best application of a variety of materials, including thinner coatings and heavier paints, is the Pressure Control Assembly.For a smooth, even finish, the Chromex Piston Pump makes sure the sprayer continuously applies high pressure. Sturdy inlet and outlet valves aid in preserving the right fluid flow, while packings and O-rings offer a tight seal to stop leaks and lessen wear, thereby prolonging the life of the pump.
Why Choose Genuine Graco RentalPro 210PC Parts?
- Chromex™ Piston Rods – 64 Rc hardness doubles wear life versus spray-painted rods used by copycat kits.
- SmartControl 1.0 Firmware – pressure sensor holds fan width ±1 % from 300 psi stain to 3 300 psi block-filler; imitations “hunt” and waste paint.
- V-Max Blue™ Packings – self-lubricating UHMW/leather stack seals in 40 °F dawn starts and 110 °F attics alike.
- MaxLife™ Carbide Seats – shrug off titanium-dioxide wall paint that pits stainless knock-offs in a weekend.
- Warranty Stays Live – only genuine parts keep Graco & Honda coverage intact. One clone coil = zero warranty.
Key Features & Specs at a Glance
| Metric | Value |
|---|---|
| Max Working Pressure | 3 300 psi / 228 bar |
| Max Flow (single gun) | 0.47 gpm / 1.8 L min |
| Motor | 0.65 kW brushless DC • Advantage Drive™ |
| Pump Swap Time | <60 s via ProConnect™ door |
| Recommended Tip | 0.013″–0.021″ RAC X LP |
One Parts Bin • Five Sprayers Saved
Graco standardised stroke length and clutch geometry across its small-electric family. That means many 210PC parts bolt directly onto:
- Graco 650 Pro – identical Endurance™ lower and Easy-Out filter core; jumper sets motor amperage.
- Magnum XR7 – upgrade path once you install ProConnect door; pump, filters, and RAC X tips match.
- Ultra 395 PC – shares seats, balls, 60-mesh filters and the Contractor PC gun cartridge.
- LineLazer 3400 Striper – whip hoses, gun filters, pressure sensor all interchangeable.
- GMAX 7900 Electric Conversion – Endurance lower and SmartControl board share harness plugs.
No more hunting separate SKUs—one labelled drawer covers rental-yard turnover and contractor emergencies alike.
Top-Moving RentalPro 210PC Parts
- 17C487 Endurance™ Pump Lower – Chromex rod, V-Max packings, MaxLife seats pre-torqued; pressure tested at 5 000 psi.
- 17Y297 Contractor PC Gun – rebuild cartridge in five minutes; viewable in graco paint sprayer parts diagram.
- 240 794 BlueMax II 50 ft Hose – ¼″ ID, 3 300 psi dual-swivel; pairs with 3 ft whip for low strain.
- 17G180 RAC X LP 517 Tip & Guard – sprays latex at 1 400 psi; 18 % less overspray vs. standard 517 tip.
- Easy-Out™ Filter Set – 30-mesh yellow, 60-mesh black, 100-mesh blue; swap in seconds as coatings change.
- Pump Armor™ Gallon – locks out corrosion and keeps leather packings pliable during winter lay-ups.
Five Pro Tips to Stretch 210PC Lifespan
- Warm Flush – 100 °F water dissolves latex 30 % faster; hoses rated 160 °F.
- TSL Wet-Cup Discipline – five drops every break; dry cups score rods before lunch.
- Rotate Hose Ends Weekly – balances liner wear, maintains SmartControl capacitance.
- Mesh-to-Tip Rule – 60-mesh for 0.017–0.021″ tips; 100-mesh for enamel; 30-mesh for elastomeric.
- Colour-Code Bins – blue = electric rigs, red = gas, yellow = handheld (graco fine finish sprayer)—never grab the wrong kit again.
Frequently Asked Questions
Will 17C487 fit my 2015 395 Graco Sprayer?
Yes—identical clutch pin; install ProConnect door kit 17A226 first.
Which fuse rating protects the board?
15 A slow-blow inline; OEM only.
Can I spray solvent enamel?
Packings solvent-rated; flush mineral spirits, store in Pump Armor™.
Ready to Erase Downtime & Boost Profit?
Add Endurance pump, Easy-Out filter kit and LP tip bundle to your cart now. We’ll ship —so tomorrow your RentalPro 210PC hits pressure at sunrise and your crew splashes colour, not solvent.