Graco Pressure Roller Assembly 244279

Cut rolling time in half and eliminate messy paint trays. Graco® EvenFlow™ Pressure Roller Assembly 244279 attaches to almost any airless spray gun with a 7/8-inch threaded guard and feeds coating straight through the roller core, so you keep both hands on the wall and paint where it belongs. Contractors who run Ultra Max II 695 ProContractor pumps or compact 395 Graco sprayers love the way this kit drops on in minutes and finishes big walls in a single pass.

Graco Pressure Roller Assembly Model 244279, available at Sprayersandparts, is a crucial equipment for applying paint smoothly and evenly over big surfaces. This roller, which turns any compatible Graco spray gun into a pressure roller, is perfect for both professionals and do-it-yourselfers. It enables rapid, controlled painting without the need for an additional roller tray. This assembly is made to be efficient and produce high-quality results when combined with items like Graco 107590 Roller Cover, which is ideal for uniform coverage, and the Graco 244271 Roller Frame, which provides stability and longevity. Our premium Graco parts provide long-lasting performance and simple, mess-free painting, allowing you to take on bigger tasks with less downtime. Finding the ideal roller parts and accessories for your requirements is made simple at Sprayersandparts by our user-friendly website and product knowledge. For expert, seamless results on every project, check out our Graco Pressure Roller Assembly 244279 and necessary roller accessories.

Find, Fit & Finish Faster with Graco Pressure Roller Assembly Model 244279

The kit ships complete—no surprise add-ons:

9-in EvenFlow roller frame (chrome-plated steel)
1/2-in nap roller cover (model 107590)
20-in heavy-duty extension pole
45° swivel adapter for ergonomic reach

Rated to 3 600 psi / 24.8 MPa, it easily handles block-filler pressures from a GH200 or fine-finish lacquers from a 395 PC—without blowouts or leaks.

Why Choose Genuine Graco 244279 over Look-Alikes?

EvenFlow™ Core. Paint exits down the centre tube and floods the nap evenly, eliminating heavy edges that plague dip-rollers.
3 600 psi safety margin. Every unit is hydro-tested 150 % above rating—critical when your graco 695 parts pump spikes during tip cleanout.
Quick-clean design. Thumb-latch frame pops open for a 30-second cover swap; the core flushes clear with one trigger pull.
Universal threads. 7/8-in connection fits Contractor PC, Contractor FTx and most graco spray gun parts diagram guns—no adapters for the 695 or GMAX family.
Full factory warranty. Using non-OEM swivels voids coverage; stay genuine, stay protected.

Technical Snapshot

Max Working Pressure	3 600 psi / 24.8 MPa
Roller Width	9 in (229 mm)
Nap Height	1/2 in woven polypropylene
Extension Length	20 in fixed heavy-duty steel
Swivel Adapter	45° live swivel—no drip coupler
Thread Size	7/8 in UNF (standard Graco guard)

Compatible Sprayers & Ideal Use-Cases

244279 kit thrives on a wide range of pumps—electric, gas or hydraulic:

Ultra Max II 695 ProContractor (electric)—perfect for interior latex & acrylic block-fill.
GMAX 7900 Gas—feed high-build elastomerics through the roller without tray refill hassles.
GH200 Standard gas-hydraulic—pair with 60-mesh graco filters and strainers for rooftop fireproofing.
395 & 495 Graco Sprayers—lightweight rigs gain big-wall capability with zero overspray cleanup.
TrueCoat 360 Cordless (touch-up mode)—use the RAC X LP tip & guard for seamless pattern match via graco truecoat 360 parts.

Smart Accessory Bundles—One Click, Zero Regrets

BlueMax II 3 ft whip. Adds flexibility at the wrist when rolling 9-ft ceilings.
20–40 in Telescoping Pole. Upgrade the fixed extension for vaulted foyers—pairs with all graco extension tools.
RAC X LP & FFLP Tips + Guard. Keep one tip in the gun and another on the roller for edge-cut perfection.
Pump Armor® flush kit. Attach after final stroke—prevents dried paint in the roller head and pump passages.

Pro Tips to Make the Kit Last Twice as Long

1 — Pre-lube the core. Mist the roller tube with water when spraying latex; it prevents first-minute drag.
2 — Keep pressure under 1 500 psi for finish coats. Higher PSI atomizes inside the cover and weeps.
3 — Back-flush immediately. Snap a garden-hose Spash-Flush™ adapter to wash the cover in 30 seconds.
4 — Rotate covers. Two covers per wall let the first soak while you roll the second.
5 — Log hose hours. Replace the whip every 500 gal to protect the swivel bearing.

Ready to Skip the Tray & Roll Like a Pro?

Add Graco Pressure Roller Assembly 244279 and any extension or tip bundle to your cart now. One freight fee, one tracking link, one mess-free job tomorrow.