Graco Mark X HD 3-in-1 Series Electric Airless Sprayer Parts

Subcategories

Graco Mark X HD 3-in-1 Electric Airless Sprayer Parts—Powerhouse Performance, Done Right

If you bid big commercial interiors, EIFS base-coats, or full-skim Level-5 rehab, Graco Mark X HD 3-in-1 is the production monster that pays your payroll. Its 4 HP MaxPower™ brushless motor drives an Endurance Chromex® pump that pushes 2.1 GPM at 3 300 PSI through up to a 0.045-in tip—double the output of a Mark V and plenty of headroom for heavy drywall mud, intumescent coatings, and elastomeric primers.

When those numbers pay your mortgage, settling for off-brand seals or “close-enough” guns is more than risky—it’s expensive. That’s why professionals across rely on SprayersAndParts.com for factory-approved Graco airless paint sprayers and parts.

Why Choose Genuine Mark X HD 3-in-1 Components?

Tight machining—±0.001 in tolerances on Chromex rods keep dead-band near zero, eliminating zebra stripes in Level-5 finish work.
MaxFlo 2 fluid passages—oversized ports spin the piston 360° so wear distributes evenly and pump life extends well past 10 000 gal.
SmartControl 4.0 electronics—the lowest pressure fluctuation in the class ensures a glass-flat fan pattern from trigger-pull to release.
BlueLink™ connectivity—track gallon count, pump hours, and location from your phone for data-driven maintenance scheduling.

Key Mark X HD Technical Specs

Max Flow	2.1 GPM / 8 L min^-1
Max Pressure	3 300 PSI / 228 bar
Max Tip (1 gun)	0.045 in RAC X LTX / LP
Cycles per Gallon	≈ 70
Required Generator	5 kW (230 V 16 A draw)
Dry Weight	154 lb (70 kg) Hi-Boy frame

Bottom line: you cover up to 25 000 sq ft of primer or 15 000 sq ft of Level-5 skim in a single shift, shaving entire calendar days off multi-story schedules.

Inventory Smarter—Cross-Fit Parts for Multiple Rigs

graco 495 paint sprayer—shares SmartControl sensors and many Chromex seal sets, so one kit covers your trim sprayer and your texture rig.
graco magnum x5 parts diagram—our printable PDF helps you cannibalize tips, filters, and suction tubes when the rental house is closed.
graco hose—BlueMax II 1/2-in hoses rated to 3 300 PSI fit Mark X and every smaller gun in your fleet while weighing 10 % less than generic lines.
Shop the Best Graco Machine—bulk consumables like RAC X guards and LP tips interchange across the full Mark-series and Ultra Max II line, unlocking volume discounts.

Five Pro Tips to Triple Pump Life

Log gallons. BlueLink sends a push alert every 500 gal so you swap packings before they weep.
Wet-cup nightly. Two pumps of TSL on the rod costs pennies vs. a $700 piston swap.
Rotate tips. Change direction each day to keep the piston wearing evenly on all 360° surfaces.
Stage a spare graco drywall smoothing blade. One dropped tool can stop texture flow; a backup keeps your crew on the clock.
Color-code parts bins. Separate high-pressure fittings from low-pressure texture gear so 6 a.m. mobilization isn’t a scavenger hunt.

Frequently Asked Questions

Can I run two guns?

Yes—split the outlet into two 3/8-in lines and tip to 0.031 in each. Flow drops to ≈ 1.0 GPM per circuit, still ideal for drywall mud or heavy primers.

Does the Mark X share parts with my graco 495 paint sprayer?

Many do: the lower packings, SmartControl board, and RAC X tip guard are identical. Keep one seal kit on the truck for both rigs.

What’s the warranty?

Graco backs the pump using OEM parts keeps that guarantee intact.

Ready to Elevate Your Crew’s Throughput?

Add authentic Graco Mark X HD 3-in-1 Series Electric Airless Sprayer parts to your cart—plus smoothing blades, 495 PC accessories, BlueMax hoses—and feel the production lift tomorrow. SprayersAndParts turns procurement friction into flawless finish work.