Downtime is budget burn. When a Mark VII HD 3-In-1 loses prime or the pump dies mid-shift, you’re paying a crew to watch paint dry—literally. Our site stocks every OEM component from piston rods to airless paint sprayer attachments, restoring the sprayer that lays down 6.4 L / min (1.7 GPM) at 3300 PSI and handles tips up to 0.047″—40 % more productivity than the Mark V. SprayersAndParts turns breakdowns into quick fixes so you can finish texture, primer and paint coats ahead of schedule.
Why Choose Genuine Parts Over “Almost-Fits”?
- Exact-Fit Threads & Seals ≫ Each Chromex™ pump, V-Max Blue™ packing and SmartControl™ sensor is CNC-matched to Graco torque specs—no bushings, no leaks.
- 2× Service Life ≫ Chromex rods and carbide seats spray abrasive silica-filled muds twice as long as plated aftermarket copies.
- ProConnect™ Minutes-Not-Hours Swaps ≫ One-pin pump removal means field techs change a lower in under 60 seconds—no shop visit.
- Warranty Backed by Graco.
Hard Numbers That Make Money
Flow Rate: 6.4 L/min (1.7 GPM) | Operating Pressure: 0–3300 PSI (0–228 bar) | Motor: 2.9 HP brushless | Max Tip: 0.047″ single-gun / 0.039″ dual-gun | Weight: 67 kg ProContractor cart
The Mark VII HD’s hydraulic clutch keeps pressure ripple under 3 %, giving a fanned-out, glass-smooth finish even through 150 ft of graco airless parts hose. Low-pressure LP tips cut overspray by 50 %, saving an average of 0.8 gal on every 1,000 ft² of interior prime. An onboard BlueLink™ module logs gallons, tip life and maintenance alerts to any phone, eliminating clip-boards forever.
Direct-Fit & Retrofit Machines
Use one that covers your mixed fleet:
- Mark VII HD ProContractor & Standard (EU 17E667 / 26C994) — identical pump block and rod length.
- Mark VII XT HD 3-In-1 (20B961) — same ¾″ inlet and 0.047″ tip rating—swap lower in minutes.
- Mark V HD 3-In-1 rigs upgrading to higher flow—requires 248-426 suction kit.
- Ultra Max II 795 & 1095 when texture crews need the larger 145 mm stroke.
- 3900 & 230 gas rigs via 243392 adapter for heavy elastomeric block-fill.
- Cordless crews hand-off leftovers to Graco TrueCoat 360VSP; its liners and tips share the same RAC X seats for unified inventory.
Top-Moving Parts—All on Our Shelf
| SKU | Fixes | Bundle Ideas |
|---|---|---|
| 17E854 | MaxLife® Pump Lower—ends cavitation | graco sprayer repair kit in Houston Texas for field rebuilds |
| 17P187 | SmartControl 4.0 Board—stops pressure spikes | BlueLink™ telemetry dongle + spare fuse |
| 25U274 | Contractor PC™ Gun—lighter trigger | 0.021–0.047 graco sprayer tips & RAC X guard |
| 17H573 | QuikReel™ Hose Reel | 100′ BlueMax II ½″ hose + 3′ whip |
| LP619 | Low-Pressure Tip 0.019″ latex | Tip clean-out needle + graco spray gun accessories |
Keep It Spraying—10,000-Hour Maintenance Plan
- Log Hours with BlueLink™ and rebuild packings every 225 spray hours using kit 15C742.
- Flush Daily with the mildest solvent that cleans your coating—hot xylene melts V-Max seals.
- Rotate Tips 180° at first sign of tailing; a new LP 547 costs less than one back-roll hour.
- Store Wet in Pump Armor®; corrosion risk drops 80 % over a dry tank.
- Color-Code Bins: blue for graco airless parts, red for gaskets, yellow for graco paint sprayer parts list—techs find kits fast.
Stop Wasting Payroll—Start Spraying Profit
Click Add to Cart —so you’re back to spraying, invoicing, and winning bids tomorrow.
