Graco Ultra 395 Electric Airless Sprayer

Graco Ultra 395 Electric Airless Sprayer – Complete Parts, Diagrams & Accessories

The Graco Ultra 395 is a robust graco electric paint sprayer built to combine contractor-grade durability with manageable size and ease of maintenance. This 7/8 HP unit—available on both stand and Lo‑Boy carts—uses an Endurance Chromex pump, SmartControl 1.0, and ProConnect technology to deliver up to 0.54 GPM at 3,300 psi.

Equipped with a graco airless spray gun (Contractor PC) and RAC X LP 517 tip, plus a 50 ft BlueMax II hose—this sprayer balances portability and professional output, making it a top choice for both DIYers and pros.

Full Parts Overview with Exploded Diagram

Access to the graco paint sprayer parts diagram is essential for repairs, part numbers, and assembly. Below is a breakdown of key sub-assemblies featured in official diagrams.

1. Pump Lower & Fluid Section

• 17C487 ProConnect Endurance pump (ProConnect displacement pump assembly)—built with Chromex rods and hardened stainless cylinder.

• Use OEM pump repair kits for seals and valves, or swap with a graco replacement pump for rapid on-site maintenance.

2. Fluid Manifold & Filters

• Fluid manifold with easy-out 60-mesh filter (#246384), cap, O-rings, and drain valve assembly.

• Mesh filters are key graco paint gun accessories—swap sizes for different coatings.

3. Pressure Control & Housing

• Includes SmartControl 1.0 PC board, pressure transducer (#243222), switch, and cord strain-relief.

• Rechargeable wiring is guided via grommets, with front shield (#287058) for clean routing.

4. Motor Drive & Bearings

• Drive housing supports the pump rod, with thrust bearings (#107434, #116079), pins, and washers in the housings.

• Quiet, smooth motor coupling is critical to performance.

5. Frame & Cart Components

• Stand model (233960 series) includes sturdy base, legs, motor shielding.

• Lo-Boy (233961) includes suction cup and handle; Hi-Boy adds hose hanger and pneumatic tires.

Maintenance Tips & Accessory Swaps

• Pump Servicing
  – Keep a graco replacement pump on hand or install a graco pump repair near me rebuild kit. ProConnect makes replacement tool-free in minutes.

• Filter & Fluid Care
  – Monthly filter changes; size 60 mesh suffices for most coatings. Install swirl-screen filters for fine finishes.

• Paint Gun Accessories
  – Use RAC X tip guards, extension wands, and pressure rollers—all compatible with graco magnum x7 parts platforms.

• Hose Management
  – BlueMax II hoses are top-tier; avoid kinks and re-torque fittings monthly.

• Seal Protection
  – After use, flush and apply Throat Seal Liquid (TSL) to extend the life of piston packings.

Upgrade & Accessory Compatibility

One standout benefit of the Ultra 395 is its compatibility with Magnum X7 and other contractor systems:

• Graco Magnum X7 parts, such as RAC X tips and guards, fit the 395’s gun model.

• Common hose fittings, power cords, filters, and valves simplify part stocking across multiple tools.

• Use shared accessories like pole guns, shield kits, and pressure gauges—detailing jobs just got easier.

When to Replace or Repair

Replace or rebuild your pump if you notice:

• Loss of prime, pressure fluctuations, spitting at the gun

• Leaking from lower housing or valves

• Squealing, rattling, or ticking from the pump area

You can either DIY with OEM rebuild packs or search graco pump repair near me to find a pro-grade rebuild shop. A pump swap with 17C487 assembly restores pressure quickly and with less downtime.

Quick Reference: Ultra 395 Specs

• Max GPM: 0.54 (2 L/min) at 3300 psi Pump: Endurance Chromex (17C487)

• Motor: 7/8 HP, TEFC, ProConnect ready.

• Gun: Contractor PC with RAC X LP 517 tip

• Hose: ¼″ × 50 ft BlueMax II

• Frame: Stand or Lo-Boy/Cart

• Noise Level: Approx. 90 dB(A)

Final Takeaways

The Graco Ultra 395 offers top reliability in a compact frame. Equipped with graco airless spray gun and backed by a full graco paint sprayer parts diagram, it supports easy maintenance and parts sourcing. Shared features also support graco magnum x7 parts, making cross-tool servicing seamless.

Keep spares—filters, hoses, RAC X tips, a graco replacement pump, TSL—on hand and consider professional rebuild services if needed, just search "graco pump repair near me." With these tools and a maintenance-first approach, your Ultra 395 will deliver clean, consistent, pro-grade results for years to come using top-tier graco paint gun accessories and parts.