Graco Ultra 395 Lo-Boy Airless Sprayer Parts

Graco Ultra 395 Lo-Boy Electric Airless Sprayer remains the gold-standard entry into professional airless spraying. With a 3,300 psi pressure ceiling and a 0.54 gpm flow rate, it delivers production muscle in a low-profile frame that slips easily into service vans and tight closets. Professionals, facility managers, and rental fleets trust 395 because its SmartControl 1.0 electronics flatten out pressure spikes, keeping your fan pattern perfect even when you swap from a 515 latex tip to a 210 fine-finish orifice mid-project.

At SprayersAndParts.com we keep every OEM component in stock from graco paint sprayer attachments and graco spray tip guards to complete graco pump repair kits.

Why Genuine 395 Lo-Boy Parts Crush Aftermarket Knock-Offs

Chromex™ Endurance Pump. Hardened stainless rod and V-Max Blue™ packings last 2× longer than generic PTFE seals.
Precise machining. Seats and balls are ground to ±0.001 in—critical for holding 3,300 psi without creep.
SmartControl-ready. OEM sensors keep pressure fluctuation under ±1 %, so RAC X LP tips atomize perfectly on every stroke.
Warranty intact. Only genuine parts protect your 12-month pump, motor, and drive coverage.
Higher resale. Sprayers logged in BlueLink™ with OEM rebuilds fetch up to 15 % more at auction, according to fleet-owner surveys.

Ultra 395 Lo-Boy—Core Performance Specs

Max pressure: 3,300 psi / 228 bar
Max flow: 0.54 gpm / 2.0 L min⁻¹
Max tip size: 0.023 in (single gun)
Motor: 1.2 hp TEFC brushless DC generator-friendly, low amp draw.
Recommended production: 30–75 gal week⁻¹—ideal for residential and light commercial crews.

One Drawer of Parts—Multiple Graco Rigs

Graco engineers designed the 395 platform to share consumables with many larger and smaller machines, stretching every maintenance dollar:

Ultra 390 PC & 490 PC Pro—share the same ProConnect™ Express pump lower (kit 17C487) and 60-mesh Easy-Out filters.
Ultra 495 & 595 PC—identical V-Max packings and RAC X tip guards mean one graco pump repair kit re-seals three models.
Magnum XR7 & XR9—Contractor/FTx gun cartridge and LP tips cross-fit; our graco magnum XR7 parts page flags matching seats and filters.
Magnum LTS 17—uses the same 50-mesh inlet strainer; our Magnum LTS 17 paint sprayer manual download links to the shared pump diagram.
GMax 7900 gas rigs—BlueMax II hose sets and RAC X tip guards interchange, simplifying truck stock across electric and gas fleets.

Top-Selling Attachments & Accessories

Graco Spray Tip Guards (RAC X & LTX). HandTite™ design eliminates build-up at high pressure and threads straight onto any Contractor or FTx gun.
Low-Pressure SmartTips. FFLP 210 for doors, LP 517 for walls—up to 55 % less overspray while maintaining pattern fidelity.
12–36 in extension wands. Reach soffits and stairwells without ladders; color-coded collars match graco paint sprayer attachments bins for faster grabs.
BlueMax II hoses. Ultra-flexible, anti-static, and pressure-rated to 4,000 psi—no fan collapse on 200 ft runs.
Pump Armor® storage fluid. Keeps packings supple during winter lay-ups; reduces first-stroke start-up friction by 30 %.

10,000-Hour Maintenance Roadmap

Daily: Flush with FastFlush™ for 45 s; add three drops of TSL oil on the plunger.
Every 500 gal: Replace 60-mesh manifold filter; inspect inlet strainer for debris.
Every 1,000 h: Swap in a ProConnect™ Express pump lower—one bolt, one minute—then log the change on the graco pump parts diagram for warranty traceability.
Every 2 years: Change SmartControl sensor and brushless motor fuse; kits include step-by-step QR-coded videos.
Winterization: Run Pump Armor until green appears at the gun; store above 40 °F to prevent seal shrinkage.

Frequently Asked Questions

Can the 395 Lo-Boy handle elastomeric coatings?: Yes—use a 0.021–0.023 RAC X tip. For thicker roof elastomerics, step up to an Ultra 495 with a 0.027 tip.
What generator size is safe?: A clean 3,000 W inverter covers the 395’s soft-start 12 A draw; avoid undersized units that can fry the control board.
How does the Lo-Boy differ from the Hi-Boy?: Performance is identical; only the cart height changes. The Lo-Boy’s low profile slides under tonneau covers and into minivan cargo bays.
Will XR7 gun parts fit my Contractor gun?: Yes. The needle/nozzle kit in our graco contractor gun parts diagram services XR7, XR9, Magnum X5, and all Contractor/FTx guns.

Boost Uptime—Order OEM 395 Parts Today

Add genuine Graco Ultra 395 Lo-Boy Electric Airless Sprayer parts from seal kits and graco pump repair kits to graco airless sprayer accessories to your cart now and cross-compatibility across the 390-595 platform, SprayersAndParts keeps your crews spraying, earning, and ahead of schedule job after job.