Power Up Your Projects with Genuine Graco 1095 Spray Gun & Hose ProContractor Parts
Graco Ultra Max II 1095 ProContractor dominates large-residential and medium-commercial work because it pairs a 2.4 hp brushless motor with a 3300 psi, 1.2 gpm pump. Each rig leaves the factory with a BlueMax II ¼″ × 50-ft hose and a Contractor PC gun—but on a 40-story repaint those consumables wear out fast. Downtime is dead time, so contractors rely on our shelf of factory-packed gun, hose, and filter parts that drop straight into the 1095, its 695/795 siblings, and even gas rigs like the GMAX 5900.
Why Graco-Certified Gun & Hose Parts Matter
- BlueMax II Hose—3300 psi rating with a 4:1 burst margin; nylon-braid liner cuts pressure drop 10 % vs. bargain hoses.
- Contractor PC Gun—adjustable four-finger trigger; ProConnect cartridge swaps in <2 min.
- RAC X LP Tips & Guards—spray 30 % lower pressure, 18 % less paint lost to overspray.
- SmartControl-Ready Capacitance—only OEM hoses feed correct signal; clones can trip low-pressure faults.
- Warranty & Our No-Clone Guarantee.
Key Hose & Gun Specifications
| Component |
OEM Spec |
| BlueMax II Hose 50 ft (240 794) |
¼″ ID • 3300 psi • dual-swivel ends • ≤160 °F fluid |
| BlueMax II Hose 100 ft (240 797) |
3⁄8″ ID • pairs with QuikReel™ drum for 200 ft pulls |
| Contractor PC Gun (17Y043) |
4000 psi • 60-mesh filter • accepts RAC X guard |
| RAC X LP 517 Tip + Guard |
0.017″ orifice • 10″ fan @ 12″ @ 1500 psi |
| ProConnect Cartridge (17Y297) |
Tool-free needle/seat swap; 1 M+ cycle tested |
Sprayers These Parts Keep Earning
Graco builds families of rigs around shared threads, seats, and guards—meaning one box of parts covers multiple sprayers:
- Ultra Max II 1095, 695 & 795 Standard/ProContractor—same gun, graco hose, tip guard.
- GMAX 5900 & 7900 Gas Lo-Boy—identical RAC X guards and BlueMax hose capacitance.
- TexSpray Mark V HD (drywall texture) —shares 3⁄8″ BlueMax main hose; swap gun filter to 30-mesh when shooting mud.
- LineLazer FieldLazer stripers—gun cartridge & tip guard match; popular on football fields.
- Magnum XR7 & TrueCoat 360 VSP DIY rigs—LP tips and tip guards thread in; great for trim touch-ups.
Top-Moving SKU Cheat-Sheet
- 17Y043 Contractor PC Gun Kit—complete handle, graco tip guard, 60-mesh filter, tool wrench.
- 240 794 BlueMax II 50-ft Hose—interior walls & decks; add a 3-ft whip to reduce wrist torque.
- 240 797 BlueMax II 100-ft Hose—exteriors & tilt-wall; rated 3300 psi, fits QuikReel drum.
- RAC X LP 517 / 619 / 735 Tips—match fan size to substrate, cut overspray up to 35 %.
- 17Y297 ProConnect Cartridge—the five-minute graco gun repair kit every crew should carry.
- 246 215 RAC X Tip Guard—universal, 5-finger anti-pinch design.
- TSL™ 4-oz—add daily; seal life doubles on hot days.
Field-Proven Gun & Hose Hacks
- Warm Flush—110 °F water cuts latex 30 % faster; safe for BlueMax liners.
- Rotate Hose Ends Weekly—evens wear, maintains SmartControl capacitance.
- Match Mesh to Tip—60-mesh for ≥0.017″ tips; 100-mesh for enamels.
- Back-roll Textures—attach graco drywall texture sprayer handle to Contractor PC body for same trigger feel.
- Log Hours—Sharpie pump hours on frame; repack at 500 h on latex or 250 h on block-fill.
FAQs
Will a Contractor PC gun fit my Magnum XR7?
Yes—threads match; downgrade pressure <2000 psi to protect pump.
Which hose for a 300-ft run?
Use ½″ main hose first 200 ft, then 3⁄8″ BlueMax II for last 100 ft; 1095 maintains 2800 psi at a 0.031″ tip.
Can LP tips spray texture?
Yes up to 0.031″; for heavy mud switch to WideRAC texture tips and 30-mesh filter.
Ready to Stop Hose Bursts & Gun Hiccups?
Load up on OEM BlueMax hoses, Contractor PC guns, and RAC X LP tips. SprayersAndParts ships —so you spray, earn, and never look back.
Shop 1095 Gun & Hose Parts →
