Professional Compact Airless Gun for Everyday Architectural Coatings
Compatible Machines
The Graco 19Y349 Contractor PC Compact connects to most professional Graco electric airless sprayers that use a 1/4" NPSM fluid hose and operate at or below 3,600 psi. Common compatible families include:
- Classic / 390 PC (corded & cordless variants)
- Ultra 395 PC / Ultra 395 PC Pro
- Ultra Max II 490 PC Pro (Lo-Boy & Hi-Boy)
- Ultra Max II 495 PC Pro (Lo-Boy & Hi-Boy)
- Ultra Max II 595 PC Pro (Lo-Boy & Hi-Boy)
- 650 PC Pro (where fitted with 1/4" hose and RAC X tips)
Fitment note: Works with systems using RAC X guards/tips. For other sprayers (older or non-Graco), ensure a 1/4" NPSM hose (or adapter) and max pressure ≤ 3,600 psi.
What is the Graco 19Y349 Contractor PC Compact?
The 19Y349 Contractor PC Compact Airless Spray Gun is a lightweight, ergonomic professional gun designed for all-day use with architectural coatings. It’s 25% lighter and 25% smaller than the standard Contractor gun and features up to a 50% lighter trigger pull for reduced fatigue. It includes a RAC X 517 SwitchTip and RAC X tip guard and supports quick field rebuilds via the ProConnect cartridge.
Key Features
- Compact & light: spray longer with less fatigue (smaller footprint for tight spaces)
- RAC X 517 tip + guard: quick reverse-to-unclog and consistent 10" fan pattern on walls/ceilings
- ProConnect cartridge: fast, tool-free gun rebuilds onsite
- Easy filter access: helps reduce tip wear and improves finish quality
- Durable build: proven Graco construction for daily contractor use
Specifications
| Part Number | 19Y349 |
| Maximum Working Pressure | 3,600 psi (24.8 MPa) |
| Fluid Inlet | 1/4" NPSM (standard airless hose connection) |
| Included Tip & Guard | RAC X 517 SwitchTip + RAC X tip guard |
| Tip/Guard Compatibility | RAC X family (LP, FFLP, LTX, WR, etc.) |
| Approx. Gun Weight | ~18.7 oz |
| Trigger | 2-finger compact trigger with reduced pull/hold force |
What’s in the Box
- Contractor PC Compact gun (19Y349)
- RAC X 517 SwitchTip
- RAC X tip guard
- Gun filter (commonly 60-mesh)
Best For
- Interior & exterior walls/ceilings (emulsions, acrylics, enamels)
- Trim, doors, fascia, fences & decks using suitable RAC X tips
- Residential & light commercial repaint and new-build work
Frequently Asked Questions
If your sprayer uses a 1/4" NPSM hose and runs at ≤ 3,600 psi, it will typically connect directly. For other thread sizes, use a suitable adapter. Ensure your system supports RAC X tips/guard or use the correct guard for your tips.
It’s commonly bundled or used with Classic/390 PC, Ultra 395 PC, and Ultra Max II 490/495/595 PC Pro lines, and other similar PC/PC Pro electric airless units that use RAC X tips and a 1/4" hose.
Typical architectural coatings such as emulsions, acrylics, enamels, and stains. Choose your RAC X tip size to match the material and target finish. Refer to your sprayer’s manual for approved materials.
The ProConnect cartridge allows fast, tool-free rebuilds in the field. Keep the gun filter clean and follow Graco’s safety/maintenance steps for long service life and consistent spray quality.
