Graco 238563 Q Filter M&L Multipack
$54.56
$59.50
Save 8%
Available to Order
Graco 238563 Q Filter M&L Multipack keeps your gun/guard clean and your pattern smooth—ideal for thin materials like stains and enamels.
- Fits Q-Filter–compatible M & L guards on Graco airless guns
- Fine .009" filtration to reduce tip clogs
- Improves finish consistency and reduces downtime
- Multipack: quick swaps on-site for continuous spraying
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Q Filter pack for Medium & Large guards (.009) — clean finish and tip protection
Compatible Machines / Systems
The Graco 238563 Q Filter M&L Multipack installs at the spray gun/guard (not the pump). It fits Graco airless setups that use Q-Filter tip/inline filters for M (Medium) & L (Large) guards at .009" / fine filtering.
- Graco airless spray guns that accept Q-Filter tip/inline filters for M & L guards (e.g., Contractor™, FTx™, SG2/SG3 families)
- Graco RAC IV / RAC V style tip guards that are specified to use Q-Filter inserts
- Magnum DIY series (e.g., X5, X7, ProX17/19) when equipped with SG-series guns using Q-Filter inserts
- Professional rigs via the gun/guard interface when paired with Q-Filter-compatible guns/guards
- Gas/hydraulic texture & heavy-duty sprayers when operated with a Q-Filter-compatible gun/guard for fine-finish/stain work
Product Overview
Keep debris out of your tip and improve finish quality with the Graco 238563 Q Filter M&L Multipack. This fine (.009) Q-Filter helps reduce tip clogs, protects the gun/guard, and delivers a smoother pattern on thin to medium-viscosity materials.
- Fine filtration: suited for stains, lacquers, enamels, and other thin coatings
- Tip protection: minimizes spitting and pattern tails caused by contaminants
- Consistent finish: steadier spray fan and reduced downtime from clogs
- Multi-pack value: includes multiple inserts to swap out quickly on site
Key Specifications
| Part Number | 238563 |
|---|---|
| Graco Description | Q FILTER, M&L MULTIPACK |
| Filter Size | .009" (fine) |
| Pack Quantity | Multipack (3 inserts) |
| Placement | Tip/inline position at the gun/guard (not the pump inlet) |
| Typical Materials | Stains, lacquers, enamels, clear coats, thin architectural coatings |
| Compatibility Basis | Designed for Graco Q-Filter systems on M & L guards; verify your gun/guard spec |
What’s Included
- (1) Multipack of Q-Filter inserts for M & L guards — fine (.009)
Fitment Notes & Best Practices
- Check your guard: Confirm your tip guard is Q-Filter compatible and labeled for M or L size.
- Match to coating: Use .009 (fine) for thin materials; choose coarser filters for heavier coatings.
- Swap regularly: Replace clogged/contaminated inserts to maintain pattern quality.
- Keep spares: Multipack lets you rotate clean filters on the job to minimize downtime.
Frequently Asked Questions
This filter fits at the gun/guard, so compatibility depends on your gun/guard system— not the pump itself. If your gun/guard specifies a Q-Filter (.009) for M & L guards, the 238563 multipack fits your setup.
Use .009 (fine) for thin materials (stains, lacquers, enamels). For heavier latex or high-build coatings, a coarser filter is often recommended to avoid flow restriction.
Yes—placing a Q-Filter at the gun/guard helps catch contaminants before they reach the tip, reducing clogs and improving finish consistency.
Replace when you notice flow restriction, pattern distortion, or visible contamination. Many pros carry spares and swap during color changes or after flushing.
Compatibility is determined by whether the guard/gun uses the Q-Filter insert system for M & L sizes. Check your RAC-series guard’s documentation for Q-Filter support before ordering.
No reviews yet. Be the first to review this product!
