Contractor FTx 288430 — Overview & Fitment
Compatible Machines
The Graco 288430 Spray Gun (Contractor FTx, 4-finger) fits most professional Graco airless sprayers that use a 1/4" NPSM hose connection and operate at ≤ 3600 psi. Common pairings include:
- Ultra 390 PC / 395 PC / 490 PC Pro / 495 PC / 595 PC
- Ultra Max II 490 / 495 / 595 / 695 / 795 / 1095 / 1595 (Standard / Pro / ProContractor)
- GMAX II 3900 / 5900 / 7900 (architectural coatings within 3600 psi & 1/4" NPSM)
- Any Graco architectural airless sprayer with 1/4" NPSM hose & system rating ≤ 3600 psi
Always confirm hose thread and pressure rating on your specific sprayer before use.
What is the Graco 288430 Spray Gun?
The Graco 288430 Contractor FTx Airless Spray Gun is a pro-grade, durable 4-finger gun that ships ready to spray with a RAC X 515 SwitchTip and HandTite™ Guard. It features Graco’s FlexSeal™ needle design to reduce spitting and extend wear life, an EasyGlide™ swivel for freer hose movement, and a positive trigger lock for safety.
Key Features
- Includes RAC X 515 tip + HandTite™ Guard
- FlexSeal™ needle for reduced spitting and longer life
- 3600 psi max working pressure
- 1/4" NPSM inlet with EasyGlide™ swivel
- 4-finger ergonomic trigger with trigger lock
- Accepts Graco Easy-Out™ gun filters (e.g., 60/100 mesh)
Specifications
| Part Number |
288430 |
| Gun Series |
Contractor FTx (airless) |
| Max Working Pressure |
3600 psi (24.8 MPa) |
| Fluid Inlet |
1/4" NPSM (F) with EasyGlide™ swivel |
| Included Tip & Guard |
RAC X 515 + HandTite™ Guard |
| Filter Compatibility |
Graco Easy-Out™ gun filters (commonly 60 / 100 mesh) |
| Trigger |
4-finger with safety lock |
What’s in the Box
- Graco 288430 Contractor FTx Spray Gun
- RAC X 515 tip + HandTite™ Guard
- Installed Easy-Out™ gun filter (mesh varies by kit)
Fitment & Use Tips
- Match your sprayer to 1/4" NPSM threads and ensure system ≤ 3600 psi.
- Choose filter mesh by material: higher mesh (e.g., 100) for thinner paints; lower mesh (e.g., 60) for heavier coatings.
- Use RAC X tips sized for your coating and production needs.
Frequently Asked Questions
Yes. These sprayers use 1/4" NPSM hoses and operate below 3600 psi, so the Contractor FTx gun is a direct fit. Verify your hose thread and system rating.
Use 100-mesh for lighter materials (stains, lacquers) and 60-mesh for heavier paints (most interior/exterior latex). Always follow coating manufacturer guidance.
It includes a RAC X 515 tip and HandTite™ Guard. The gun accepts the full range of RAC X tips—choose size based on material and desired fan width/flow.
Yes—flush with a compatible solvent for your coating (e.g., water for latex, mineral spirits for oil-based). Follow Graco’s safety instructions and relieve pressure before servicing.
Both are rugged pro guns; FTx adds refinements like the FlexSeal™ needle and ergonomic updates aimed at smoother triggering and reduced spitting.
