Graco 244067 Easy Out Pump Manifold Long Filter 60 mesh
5/5
(1 review)
$20.00
Available to Order
The Graco 244067 Easy Out Pump Manifold Filter (Long, 60 Mesh) keeps paint clean and ensures smooth, consistent spraying performance. Designed for professional Graco sprayers.
- Part Number: 244067
- Mesh Size: 60 Mesh (for latex, primers, enamels)
- Type: Long / Vertical Easy-Out Filter
- Fits: Ultra Max II, GMAX II, GH 200-300, LineLazer IV
- Purpose: Filters debris, prevents tip clogs, protects pump
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Overview & Key Benefits
The Graco 244067 Easy Out Pump Manifold Filter (Long, 60 mesh) installs in the pump’s manifold to capture debris before it reaches the hose and tip—helping maintain spray quality, reduce clogs, and extend component life. The Easy-Out design allows fast removal for cleaning or replacement.
Compatible Machines
- Ultra Max II 695, 795, 1095, 1595 (most Standard / ProContractor / IronMan variants)
- GMAX II 3900, 5900, 7900
- LineLazer IV 3900, 5900 (equipped with Easy-Out vertical manifold filter housing)
- GH 200, 230, 300 (gas hydraulic sprayers with Easy-Out vertical manifold)
- Ultra / Ultra Max legacy units that use the long vertical Easy-Out manifold filter
- HydraMax models using the long vertical Easy-Out manifold filter
Key Features
- 60 mesh screening—ideal for most latex paints, primers, and enamels.
- Long / vertical format to maximize filtration area and flow.
- Easy-Out construction for quick removal, cleaning, and replacement.
- Protects pump, hose, and tip by trapping debris before it reaches the gun.
- Supports consistent pressure and finish quality, reducing tip wear and clogs.
Specifications
| Part Number | Graco 244067 |
|---|---|
| Type | Easy Out Pump Manifold Filter — Long / Vertical |
| Mesh Rating | 60 mesh (general-purpose for latex/enamels; balances flow & filtration) |
| Typical Materials | Latex paints, primers, acrylics, enamels (use proper thinning/straining per coating TDS) |
| Related Mesh Options* | 30 mesh (coarser, higher flow), 60 mesh (this part), 100 mesh (finer, for thinner coatings) |
| Maintenance | Inspect/clean after each use; replace if damaged, deformed, or heavily stained |
When to Choose 60 Mesh
- You’re spraying common interior/exterior latex paints and primers.
- You want a balance of flow and filtration to minimize tip clogs without starving the pump.
- You run larger tips (e.g., .017–.023) and need consistent delivery.
Frequently Asked Questions
Higher number = finer screen. 60 mesh is a versatile, general-purpose choice for most latex/enamels. 100 mesh is finer for thinner coatings but can restrict flow and raise operating pressure if used with heavy materials.
Yes—Graco 244067 is the long, vertical Easy Out manifold filter. It fits sprayers that use the vertical Easy-Out manifold housing (e.g., many Ultra Max II, GMAX II, GH, and LineLazer IV models). Check your manual or parts list to confirm the housing type and length.
Clean after each job or color change. Replace if the screen is torn, crushed, permanently clogged, or if pressure/flow issues persist after cleaning.
Most interior/exterior latex paints, acrylics, and many primers/enamels. Always follow the coating manufacturer’s TDS for thinning and filtration guidance.
Choose a 30 mesh (coarser) for heavy materials where maximum flow is needed, or a 100 mesh (finer) for thinner coatings where extra filtration is beneficial. Ensure your sprayer uses the long vertical Easy-Out housing.
5
1 review
1
0%
2
0%
3
0%
4
0%
5
100%
R
Ryan T.
Needed this fast for an active job site - for the 244067 Easy Out Pump Manifold Long Filter 60 mesh (Part #244067) and the fit and finish were spot on, no surprises. Will be ordering more parts from here.
