Graco 244071 Easy Out Pump Manifold Long Filter 30 mesh
5/5
(1 review)
$20.00
Available to Order
The Graco 244071 Easy Out Pump Manifold Long Filter (30 mesh) is built for professional airless sprayers handling heavy coatings. Designed to protect your pump and deliver smooth spray performance.
- Mesh: 30 mesh (coarse) – for latex, block filler & elastomeric materials
- Style: Long manifold filter
- Fits: Ultra Max, GMAX, GH 200, and HydraMax sprayers
- Purpose: Filters debris to extend pump and tip life
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Graco 244071 — Easy Out Pump Manifold Long Filter (30 Mesh)
Compatible Machines
The Graco 244071 Easy Out Pump Manifold Long Filter (30 mesh) is used on the following Graco professional sprayer series (long-manifold style):
- Ultra Max Series (select long-manifold models)
- GMAX Gas Airless Sprayers
- GH 200 Gas-Hydraulic Sprayers
- HydraMax Airless Sprayers
What This Part Is
The 244071 is a Pump Manifold Filter in Graco’s Easy Out design. The filter sits in the manifold to screen debris before it reaches the gun/tip, helping reduce tip clogs, stabilize pressure, and extend pump life.
- Mesh: 30 mesh (coarse) — suited for thicker materials.
- Style: Long manifold filter (not short).
- Function: Traps larger particles; promotes smoother flow and fewer shutdowns.
Key Specifications
| Part Number | 244071 |
|---|---|
| Product Name | Easy Out Pump Manifold Long Filter |
| Mesh Size | 30 mesh (coarse) |
| Filter Style | Long (for long-manifold housings) |
| Typical Materials | Heavy latex, block filler, elastomerics, and other higher-viscosity coatings |
| Fits Series | Ultra Max, GMAX, GH 200, HydraMax (long-manifold models) |
Why Use 30 Mesh?
- Optimized for thicker coatings — larger openings reduce premature clogging.
- Protects pump and tip by catching debris before it reaches the gun.
- Smoother spray pattern and more consistent operating pressure.
Usage & Maintenance Tips
- Inspect the manifold filter at each material change or when pressure spikes.
- Clean with compatible solvent/cleaner and low-pressure back-flushing. Avoid damaging the screen.
- Replace if the screen is dented, torn, or cannot be fully cleaned.
- Confirm your sprayer’s Long vs Short manifold style before ordering.
Frequently Asked Questions
No. 244071 is the Long manifold filter. If your sprayer uses a short style, choose the appropriate Short manifold filter instead.
30 mesh is a coarse screen recommended for heavy latex, block filler, elastomerics, and other higher-viscosity coatings.
It fits long-manifold versions in the Ultra Max, GMAX, GH 200, and HydraMax series. Check your manifold style and parts manual before purchase.
Replace when cleaning no longer restores flow, or if the screen is damaged. Many contractors keep spares and swap when pressure rises or flow becomes unstable.
Strain coatings before loading, keep your manifold filter clean, and match mesh to material. Use proper tip size and maintain hose cleanliness for best results.
5
1 review
1
0%
2
0%
3
0%
4
0%
5
100%
J
Joseph M.
Replaced the OEM part with this one and for the 244071 Easy Out Pump Manifold Long Filter 30 mesh (Part #244071) and the build quality matched what we expect from genuine Graco parts. Easy to order once I had the part number from the diagram.
