Graco 114410 Torx Pan Head Machine Screw

Overview of the Graco 114410 Torx Pan Head Machine Screw

The Graco 114410 Machine Screw (Torx Pan Head) is a genuine OEM fastener designed for precise assembly in Graco equipment. Its Torx pan-head design ensures secure mounting and reliable performance in demanding applications.

Key Features

• OEM Grade: Manufactured by Graco for exact fit and finish.
• Torx Pan Head Design: Provides excellent torque transmission and minimal head-strip risk.
• Machine-Screw Specification: Intended for internal assembly use in Graco systems.
• Reliable Construction: Built to endure normal service loads and vibration common in spray/pump equipment.

Compatible / Known Applications

While a full model list isn’t publicly specified, this screw is suitable for any Graco equipment that requires a Torx pan-head machine screw of matching specification. Confirm your equipment’s parts diagram.

• Graco machines whose service parts list shows part number 114410 for assembly of modules or housing components.
• Graco industrial spray rigs or finishing systems where internal fasteners of the same spec are listed.
• Any Graco unit where the original screw is damaged/stripped and the diagram references 114410.

Specification Details

Installation & Maintenance

• Ensure the equipment is safely powered-off and isolated before removing or installing fasteners.
• Remove the existing screw, noting its original location, orientation and any washers or lock-features.
• Clean the mating surfaces and check the threaded hole for damage or wear.
• Install the Graco 114410 screw and tighten to the torque specification given in your machine’s service manual.
• During periodic maintenance, inspect the screw head and surrounding area for signs of loosening, stripping, corrosion or vibration damage.

Frequently Asked Questions