Graco 114417 Self-Tapping Pan Head Screw

The Graco 114417 Self‑Tapping Pan Head Screw is an OEM fastening component used in Graco equipment to secure covers and panels where self‑tapping screws are required.

Self‑tapping design cuts threads into material during installation
Pan head profile offers broad bearing surface
Genuine Graco part number 114417

Based on 0 reviews

Description

Overview of the Graco 114417 Self‑Tapping Pan Head Screw

The Graco 114417 Self‑Tapping Pan Head Screw is a genuine OEM fastener designed for secure mounting of sheet‑metal panels and covers in Graco equipment. Its self‑tapping design allows installation without a pre‑threaded hole, while the pan head gives good bearing surface.

Key Features

OEM Grade: Manufactured by Graco to original equipment specification.
Self‑Tapping Design: Cuts its own thread into the material, reducing need for pre‑threading.
Pan Head Profile: Provides broad contact area to distribute load.
Compact Dimensions: Approx 0.3 in high × 0.7 in length × 0.3 in width (per listing). :contentReference[oaicite:5]{index=5}

Compatible / Known Applications

While no comprehensive public model list is available, this screw is known to be used in Graco machines where self‑tapping pan head fasteners are required. Confirm compatibility by checking your machine’s parts diagram.

Graco Ultra MAX 695 series machines — part listed among spare parts for that model. :contentReference[oaicite:6]{index=6}
Other Graco equipment where a self‑tapping pan head screw is specified in the service parts breakdown and the reference matches 114417.

Specification Details

Part Number	114417
Item Type	Screw, Self‑Tapping, Pan Head
Typical Dimensions	~0.3″ H × 0.7″ L × 0.3″ W (approx) :contentReference[oaicite:7]{index=7}
Manufacturer	Graco (OEM)

Installation & Maintenance

Power off and safe‑isolate the machine before servicing fasteners.
Remove the existing screw, noting its location and any washers or components around it.
Clean the mounting surface and ensure no debris or damaged threads remain.
Install the Graco 114417 screw. Drive until flush but avoid over‑tightening which can strip the self‑tapped thread.
During scheduled maintenance, inspect the screw for signs of loosening, corrosion or damage — replace with OEM part if required.

Frequently Asked Questions

The 114417 screw is used to secure panels, covers or internal housing in Graco equipment, especially where self‑tapping fasteners are required.

To confirm compatibility, check your machine’s exploded parts view or service manual. If it lists part 114417 in the relevant location, then it is the correct screw.

While a generic self‑tapping pan head screw might physically fit, using the genuine Graco 114417 ensures correct dimensions, material grade and fit for the equipment — recommended for reliability.