Graco 287034 Gun Filters
5/5
(1 review)
$24.70
In Stock
The Graco 287034 Gun Filter Kit keeps your spray gun running smoothly and ensures a clean, even finish. Ideal for both thick and thin materials.
- Includes 1 × 60-Mesh filter for latex and primers
- Includes 1 × 100-Mesh filter for stains and lacquers
- Fits Contractor, Contractor II, FTx, and FTx II spray guns
- Prevents tip clogging and improves finish quality
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Quick Compatibility Overview
Compatible Machines
- Contractor Spray Gun: 288420, 288421, 288425
- FTx Spray Gun: 288429, 288430, 288431
- Contractor II Spray Gun: 246220, 246221, 246434
- FTx II Spray Gun: 246230, 246231, 246435
- 826085 (legacy reference)
Graco 287034 Gun Filters — 1 × 60-Mesh & 1 × 100-Mesh
The Graco 287034 is a two-pack of in-gun filters designed for Contractor and FTx series spray guns. These filters help reduce tip plugging and improve finish quality by trapping debris before it reaches the tip.
| What’s in the box | Mesh rating | Typical materials | Primary use |
|---|---|---|---|
| 1 × Filter | 60-Mesh | Latex paints, primers, heavier coatings | Flow for thicker materials while catching larger particles |
| 1 × Filter | 100-Mesh | Stains, lacquers, thin enamels | Finer filtration for smooth finishes with thin products |
Key Benefits
- Helps prevent tip clogs to maintain a consistent spray pattern.
- Supports better finish quality by filtering contaminants at the gun.
- Includes two meshes so you can match the filter to the coating viscosity.
- Direct fit for listed Contractor / FTx family spray guns.
How to Choose the Right Mesh
Use the chart below as a quick selector when switching coatings:
| Coating Type | Recommended Filter | Tip Care Note |
|---|---|---|
| Primers / Latex (medium–heavy) | 60-Mesh | Strain paint; check for skins and solids before filling |
| Stains / Lacquers (thin–medium) | 100-Mesh | Keep containers closed to avoid airborne debris |
Technical Details
- Part Number: 287034
- Contents: 1 × 60-Mesh filter, 1 × 100-Mesh filter
- For Use With: Contractor, Contractor II, FTx, FTx II spray guns (see models above)
- Function: In-gun filtration to reduce debris reaching the spray tip
Frequently Asked Questions
60-mesh has larger openings for thicker coatings (e.g., latex, primers). 100-mesh has finer openings for thin materials (e.g., stains, lacquers) to enhance finish smoothness.
Replace when you notice flow restriction, frequent tip clogs, or visible damage. Many pros keep spares and swap filters when changing materials or after each major job.
This two-pack is specified for Contractor / Contractor II and FTx / FTx II guns listed above. For other gun families (e.g., Contractor PC), verify the parts list for the exact filter series before ordering.
Yes—gun filters complement pump/manifold filtration. For best results, strain paint before filling, use the correct manifold filter, and install the appropriate in-gun filter.
Match filter mesh to the coating, keep lids on material, strain coatings, flush the system after use, and replace worn filters promptly.
5
1 review
1
0%
2
0%
3
0%
4
0%
5
100%
S
Sarah J.
Replaced the OEM part with this one and this 287034 Gun Filters and the fit and finish were spot on, no surprises. Part #287034 matched exactly. Good value for a genuine Graco part.
