Graco 054130 Tube Pe Rnd .250 Od .04 Wa
$19.11
In Stock
The Graco 054130 Tube, PE, Round, 0.250" OD, 0.04" Wall is a genuine Graco replacement tubing used for fluid or air routing in various systems. Perfect for machines requiring 1/4" OD polymer tubing.
- Part Number: 054130
- Material: Polyethylene (PE/PET)
- Outer Diameter: 0.250" (1/4")
- Wall Thickness: 0.04"
- Used In: Heated Hose Kits, Tank Feed Systems, Fluid Dispense Lines
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
About This Part
Compatible Machines & Systems
The Graco 054130 Tube, PE, Round, 0.250" OD, 0.04" Wall is a genuine Graco polyethylene tube used for fluid/air routing in multiple Graco systems that specify 1/4" OD tubing. It is not limited to a single sprayer model; instead, it appears across several Graco assemblies and kits.
- Graco Heated Hoses & Applicator Kits — listed as polyethylene tubing, 1/4" OD, commonly supplied in 36 ft (11 m) lengths on applicable kit parts lists.
- Graco Tank Feed Systems — listed as tube, PET/PE, 0.25" OD, commonly supplied in 12 ft lengths on applicable system parts lists.
- General Graco fluid-handling & dispensing assemblies requiring 1/4" OD PE/PET tube as specified in the unit’s parts/maintenance manual.
Product Snapshot
| Graco Part Number | 054130 |
|---|---|
| Description | Tube, PE, Round, 0.250" OD, 0.04" Wall (polyethylene / PET as referenced in Graco documentation) |
| Outer Diameter (OD) | 0.250" (1/4") |
| Wall Thickness | 0.04" (approx. ID ≈ 0.170" — calculated) |
| Typical Lengths Seen in Kits | ~36 ft (11 m) for certain heated-hose/applicator kits; ~12 ft for certain tank-feed systems (actual length depends on the specific kit/system BOM) |
| Material | PE / PET (as specified per system manual) |
| Use Case | Fluid/air routing in Graco systems calling for 1/4" OD polymer tubing |
| Compatibility Guidance | Verify against your unit’s parts list or service manual for exact fit (look specifically for 054130). |
Key Benefits
- OEM fit: Matches Graco specifications where 054130 is listed.
- Clean routing: 1/4" OD size integrates with common push-to-connect and compression fittings used on Graco assemblies.
- Versatile: Utilized across heated hoses, applicator kits, and tank-feed setups that require polymer tubing.
Frequently Asked Questions
Yes—054130 is specified as 0.250" OD with a 0.04" wall. Always confirm the part number in your Graco manual before ordering.
Some Graco documents reference PE and others PET for this size. Follow the exact call-out in your unit’s documentation; when the BOM lists 054130, this is the intended OEM tube for that assembly.
Use fittings designed for 1/4" OD polymer tubing (push-to-connect or compression) that meet the pressure and temperature ratings of your specific Graco system.
It will if your sprayer’s parts list specifically calls out 054130 or specifies 1/4" OD PE/PET tubing for that line. Check your model’s manual to confirm.
Measure the outer diameter with calipers (should be ~0.250"). Also verify the part number in your machine’s manual to ensure an exact match.
No reviews yet. Be the first to review this product!
