Graco 054139 – TUBE, NYL, RND, .50 OD, .062 WA
Compatible Machines / Systems
The Graco 054139 nylon tube is referenced in parts lists for several Graco industrial systems and kits. Always confirm against your unit’s parts manual by model/serial number.
- Heat-Circulation / Hopper Hose Kits (assemblies calling out 1/2 in OD nylon tube)
- Uni-Drum™ Supply Systems (material supply and recirculation tubing)
- FRP / Proportioner Systems (fluid transfer/conveyance lines)
- Delta / PRO Spray Packages (package drawings listing nylon tube)
Key Specifications
| Manufacturer / Part # | Graco 054139 (also shown as 54139 in some catalogs) |
| Description (Catalog) | TUBE, NYL, RND, .50 OD, .062 WA – nylon round tube with 0.50 in outer diameter and 0.062 in wall thickness |
| Material | Nylon (for coatings/material transfer in specified assemblies) |
| Outer Diameter (OD) | 0.50 in (≈13 mm) |
| Wall Thickness | 0.062 in |
| Typical Length in Kits | Often listed as 17 ft (≈5.2 m) when supplied as part of a kit (length may vary by assembly) |
Overview
The Graco 054139 is a genuine nylon tube used as a fluid/conveyance line inside various Graco industrial finishing systems and accessory kits. Its 0.50 in OD and 0.062 in wall provide a durable, chemically resistant path for circulation and supply where this exact size is specified.
When to Choose This Part
- Replacing worn, kinked, or chemically degraded tubing specified as 054139 in your parts list
- Restoring OEM performance in heat-circulation kits, Uni-Drum supply systems, FRP proportioners, and certain spray package assemblies that call out this tube
Frequently Asked Questions
It indicates a 0.50 inch outer diameter and 0.062 inch wall thickness for the nylon round tube.
Yes—some distributors list the part as 54139; it refers to the same Graco 054139 component.
The catalog description specifies diameter and wall. In certain kits, the tube is supplied in a pre-cut 17 ft length; follow your kit/manual for exact length.
This tube appears in manuals for industrial systems and kits (e.g., heat-circulation kits, Uni-Drum supply systems, FRP proportioners, and certain spray packages). For handheld or contractor sprayers, verify by checking the parts list for your specific model.
For safety and performance, use the exact part number or an OEM-approved equivalent. Substitutions can affect pressure ratings, chemical compatibility, and routing.
