Buy an HVLP Paint Sprayer in Roy
Genuine Graco HVLP turbine systems for cabinets, trim and fine finish, sent straight to Roy from our own floor. Turbine HVLP, air-assisted airless and the guns to match.
Delivering across Roy
2 ZIP codes served:
84067, 84315
−27%
−27%
−27%
−27%
−27%
−27%
−16%
Which Fine Finish Setup Fits Roy Work?
HVLP trades speed for control. Less atomising pressure means far less overspray and a smoother film. Slower on area, better on anything with a visible surface. Here is how the ranges divide for finishers across Roy and the wider Utah area.
Turbine HVLP
FinishPro 7.0–9.5. Self-contained, no compressor needed.
Air-Assisted
FinishPro II 395/595. Faster than HVLP, finer than straight airless.
Edge II Guns
For existing turbines. Fine finish where flow-out decides the job.
AirPro & Razor
Shop and booth guns. Waterborne, solvent and automotive refinish.
Fine finish equipment we ship
Serving Roy and the wider Utah area
- FinishPro HVLP 7.0 / 9.0 / 9.5 — turbine systems
- FinishPro II 395 / 595 PC — air-assisted airless
- Edge II & Edge II Plus — HVLP guns
- AirPro & AirPro EFX — shop and booth guns
- Finex Air Spray — gravity and pressure feed
- Fine Finish Tips — sized to your coating
Not sure which setup?
Give us the material and the surface and we will match turbine or air-assisted to it — thicker coatings need more than a small turbine can give.
+1 713-931-4102 or browse HVLP guns →We also ship to 8 nearby Utah communities
Orem, Brigham-city, Layton, Herriman, Sandy, Ogden, Centerville, American-fork
Buying HVLP in Roy — Common Questions
Straight answers for finishers and cabinet shops in Roy, Utah.
Do you deliver HVLP sprayers to Roy?
Yes — we ship to all 2 Roy ZIP codes, including 84067, and across Utah. Orders placed by 1 PM CST ship the same business day.
What does HVLP actually give me over airless?
Much less overspray and a smoother laid-down film. Less product wasted, and less masking to clean up. The trade is speed — HVLP covers area more slowly than airless.
Turbine HVLP or air-assisted airless?
Turbine wins on finish and convenience, air-assisted on throughput. A FinishPro HVLP turbine is self-contained and needs no compressor. A FinishPro II air-assisted rig moves far more material per hour while still breaking it up finely. Volume is the deciding factor between the two.
Do I need to thin the material?
Often, yes — HVLP is more sensitive to viscosity than airless. Lower-stage turbines cannot atomise thick coatings well. Too much thinner and you trade one defect for another.
Can I use an HVLP gun on my existing setup?
Only if the air supply suits it. An Edge II turbine gun is not a compressed-air gun and vice versa. Check CFM before buying a compressed-air gun. Tell us your setup and we will confirm.
Can I get parts for the turbine later?
Yes. Repair kits, air filters and gun internals are held. A blocked filter makes the turbine work hard and shortens its life. Machines ship with full manufacturer warranty.
HVLP & Fine Finish Equipment for Roy, Utah
Contractors and DIY painters in Roy, Utah rely on Sprayersandparts.com for authentic Graco sprayers, spray guns, hoses, and repair kits. We serve the Roy area (84067, 84315) with fast, traceable shipping every business day. From the smallest o-ring to a complete airless pump assembly, Sprayersandparts.com stocks the parts that keep Graco sprayers running. We also carry full replacement spray guns, pressure-relief valve assemblies, motor brushes, and electronic control boards for Ultra Max and GMax models. Shop the Sprayersandparts.com catalog by sprayer model, series, or part category to find exactly what you need. We ship to Roy quickly and include tracking on every order so you always know where your parts are.
We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 2 Roy ZIP codes (84067, 84315). Order by 1 PM CST and it ships same day, tracked.
Why it matters: higher transfer efficiency pays the machine back in lacquer alone — before you count the hours saved in rework.
Serving Finishers Across Utah
Graco has built its reputation on consistent, high-quality airless spray technology. For painters working in Roy, Utah, that reputation matters — on large commercial projects where downtime is costly and on residential jobs where finish quality is everything. Bookmark Sprayersandparts.com as your Graco source for Roy, Utah. We maintain inventory year-round, ship every business day, and can help you identify the right part number when you're not sure which component fits your specific unit.
Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.
From small residential jobs to full commercial repaints, Utah contractors source Graco parts through Sprayers and Parts. Orders go out daily to 48 Utah locations, including American Fork, Bountiful, Brigham City.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.
Wherever you are in Utah, the same stock and the same dispatch times apply.
Working outside Roy? Browse every Utah city we ship to to find your area.
Find Us on Google
Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Roy.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.