Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Palmdale, California

Graco Magnum X7 Sprayer in Palmdale

A genuine Graco airless at homeowner scale, for people painting their own place, shipped direct to Palmdale with no dealer wait. We hold the spares too, so it stays running past the warranty.

Fast Shipping
Order by 1 PM CST
100% OEM
Factory-new Graco
Parts Backed
Pump kits & spares stocked

Delivering across Palmdale

9 ZIP codes served:
91390, 93535, 93543, 93550, 93551, 93552, 93590, 93591, 93599

The machine, its parts and what sits either side

Is it the right machine

Is the Magnum X7 Enough for Your Palmdale Job?

Graco positions it for personal use, and the duty cycle reflects that. For a few rooms, a fence line or a deck each season it is the right tool. Used commercially every day, it will wear out quickly; step up instead.

Good For

Rooms, trim, fences and garden structures on your own property.

Not Built For

Daily commercial production or continuous spraying — that wears it out fast.

Serviceable

Repackable rather than disposable.

Step Up

Ultra Max II 490/495 for daily production.

Where the X7 sits in the range

Serving Palmdale and the wider California area

Not sure it is enough?

Tell us what you are painting and how often and we will tell you honestly — even if that means a cheaper model suits you better.

+1 713-931-4102 or compare every machine →

Graco Magnum X7 in Palmdale — Common Questions

Straight answers for property owners and DIY painters in Palmdale, California.

Do you deliver the Magnum X7 to Palmdale?

Yes — we ship to all 9 Palmdale ZIP codes, including 91390, and across California. Order before 1 PM CST and it leaves that day.

What is the difference between the X5 and X7?

They are the same family, with the X7 rated for more work per year and a longer hose. For a single project the X5 usually does. Bigger exteriors favour the X7. They share a pump repair kit, so spares are common to both.

Can I use it for commercial work?

You can, but it is not designed for it and will not last. Homeowner machines carry a duty rating that crew use blows straight through. A 390 PC will cost more up front and far less over three years.

What can I spray through it?

Most architectural coatings — latex, acrylics, stains and primers. Thick high-build coatings need a bigger pump. Match the tip to the machine, not to the wall. See tips and guards.

Can I repair it rather than replace it?

Yes — the pump repair kit covers both the X5 and X7. Guns, hoses, valves and enclosure parts are all available. Most X7s are worth repairing rather than scrapping.

How do I look after it between jobs?

Flush it completely and store it with pump protector fluid. Material left to set is the most common cause of failure. Freezing damages seals and housings.

Graco Magnum X7 for Palmdale, California

Get genuine Graco sprayers and parts delivered to Palmdale, California through Sprayersandparts.com. Our inventory covers thousands of OEM components for Magnum, ProX, FinishPro, and Ultra Max series sprayers — all shipping to Palmdale (91390, 93535, 93543, 93550, and more). Specialty items like Graco DataTrak displays, SmartControl pressure systems, and DualTip spray gun handles are available alongside everyday consumables such as tips, strainers, and lubricant. We carry parts for both electric and gas-powered Graco sprayer models. All orders ship with tracking, and our support team can help you identify the correct part number for your specific Graco sprayer. For painters in Palmdale, Sprayersandparts.com is the reliable online alternative to hunting parts locally.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 9 Palmdale ZIP codes (91390, 93535, 93543, 93550, 93551, 93552, 93590, 93591, 93599). Anything ordered before 1 PM CST leaves that day.

The practical point: a homeowner sprayer usually dies of neglect rather than use — the clean-up at the end is the whole maintenance schedule.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Factory-new, full warranty
Repairable
Pump kits shared with the X5
9 ZIPs
Covered in Palmdale alone

Serving California Property Owners

Airless painting in Palmdale, California demands reliable equipment. Graco's lineup — from the compact Magnum X5 to the high-volume Ultra Max II 1095 — covers every application scale, and keeping these sprayers running requires genuine OEM parts, not substitutes that can wear prematurely or fail mid-job. Keep Sprayersandparts.com bookmarked for your Graco parts needs in Palmdale, California. From emergency replacements to scheduled maintenance parts, we have the inventory, the shipping speed, and the product knowledge to keep your operation running.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

We ship genuine Graco equipment to painting professionals throughout California. Our California coverage spans 427 cities and towns — among them Adelanto, Agoura Hills, Agoura.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every California order ships from the same warehouse on the same schedule.

Working outside Palmdale? Browse every California city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Palmdale.

View Our Google Profile
+1 713-931-4102
Fast shipping to Palmdale 91390

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Had this on hand as a spare and for the 244240 Return Hose Assembly (Part #244240) and the machine was back up and running the same day. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #244240
“Needed a replacement 17C725 Pressure Control Indicator, part number 17C725, and it fit perfectly with no modifications needed. Exactly what was described - no complaints.”
Verified Buyer · Part #17C725
“Needed a replacement 102040 Lock Nut, part number 102040, and it matched the original spec exactly, down to the part number. Good value for a genuine Graco part.”
Verified Buyer · Part #102040
JB
“The 196180 Bushing (Part #196180) - the machine was back up and running the same day. Glad we found the exact part number we needed.”
Verified Buyer · Part #196180
“Bought this after the original wore out, and for the 15C894 Fluid Needle Guide (Part #15C894) and it matched the original spec exactly, down to the part number. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #15C894
“Replaced the OEM part with this one and for the 25A877 Filter Manifold Repair Kit (Part #25A877) and it matched the original spec exactly, down to the part number. Would order again without hesitation.”
Verified Buyer · Part #25A877
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart