Buy Graco Spray Hoses in Madison
Factory-original Graco hose, correctly rated and coupled, dispatched to Madison without a distributor in the middle. BlueMax II, Xtreme-Duty, whip hose and texture line in stock.
Delivering across Madison
3 ZIP codes served:
35756, 35757, 35758
−15%
−26%
−26%
Which Hose Suits Madison Work?
The hose does more to the spray pattern than most people expect. Every extra foot costs pressure, and a narrow bore costs more of it. Under-size it and the pump works harder for a worse fan. Here is how the ranges divide for crews across Madison and the wider Alabama area.
Airless Hose
BlueMax II, 1/4" and 3/8". The standard run between pump and whip at 4000 PSI.
Whip Hose
3 to 6 ft at the gun. Saves your hand over a long day.
High Pressure
Xtreme-Duty to 7250 PSI. Protective coatings and long runs.
Texture & Material
1" and 1.25" bore. Drywall texture and aggregate material.
Hose ranges we stock
Serving Madison and the wider Alabama area
- BlueMax II Airless — 3/16" to 1/2", coupled and ready
- Whip Hose — flexible leader at the gun
- Xtreme-Duty High Pressure — rated to 7250 PSI
- Texture & Material Hose — 1" and 1.25" bore
- Fittings & Swivels — couplers, unions, swivels
- Gun & Hose Kits — matched gun, hose and tip
Not sure what fits?
Send the model, how far you need to reach and the tip you run and we will size the bore and pressure rating together — both have to suit the pump or you lose pressure at the gun.
+1 713-931-4102 or browse every hose →We also ship to 8 nearby Alabama communities
Phenix-city, Enterprise, Dixiana, Princeton, Athens, Vestavia-hills, Hoover, Oxford
Buying Spray Hose in Madison — Common Questions
Straight answers for painters and contractors in Madison, Alabama.
Do you deliver spray hose to Madison?
Yes — we ship to all 3 Madison ZIP codes, including 35756, and across Alabama. Same-day dispatch applies to orders in before 1 PM CST.
What hose diameter do I need?
Length and tip orifice drive the diameter more than pump size does. As a working rule: 1/4" suits short runs and small tips, 3/8" is the standard for most contractor work, and 1/2" is for long runs or high-output machines. Added length means added pressure drop, so going up a size on a long run keeps the fan full.
What is a whip hose for?
A whip is a 3 to 6 ft flexible leader at the gun end. It keeps the stiff main line off the gun so the gun moves freely. Most crews treat it as essential rather than optional.
What pressure rating do I need?
Rate the hose to what the machine can produce at full stroke, not what you normally spray at. Most contractor airless hose is 4000 PSI, which suits the majority of machines. Anything running protective coatings usually needs the higher rating. Never fit a hose rated below your pump.
Can I join two hoses to reach further?
Yes — use a rated union, not a hardware-store fitting. A narrower section anywhere in the line limits the whole run. Couplers and swivels are in adapters and fittings. Past a long total length, step the whole run up a size instead.
Why not just use generic hose?
These pressures are far beyond ordinary air or water line. The couplings matter as much as the hose itself. Most failures happen at a badly fitted end, not in the middle of the hose.
Graco Spray Hoses for Madison, Alabama
Contractors and DIY painters in Madison, Alabama rely on Sprayersandparts.com for authentic Graco sprayers, spray guns, hoses, and repair kits. We serve the Madison area (35756, 35757, 35758) with fast, traceable shipping every business day. From the smallest o-ring to a complete airless pump assembly, Sprayersandparts.com stocks the parts that keep Graco sprayers running. We also carry full replacement spray guns, pressure-relief valve assemblies, motor brushes, and electronic control boards for Ultra Max and GMax models. Shop the Sprayersandparts.com catalog by sprayer model, series, or part category to find exactly what you need. We ship to Madison quickly and include tracking on every order so you always know where your parts are.
We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 3 Madison ZIP codes (35756, 35757, 35758). Order by 1 PM CST and it ships same day, tracked.
Why it matters: it is the least expensive component and the one that ends the day when it goes — one spare hose beats one lost job.
Serving Painters Across Alabama
Graco has built its reputation on consistent, high-quality airless spray technology. For painters working in Madison, Alabama, that reputation matters — on large commercial projects where downtime is costly and on residential jobs where finish quality is everything. Bookmark Sprayersandparts.com as your Graco source for Madison, Alabama. We maintain inventory year-round, ship every business day, and can help you identify the right part number when you're not sure which component fits your specific unit.
Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.
Sprayers and Parts supplies painting contractors across Alabama with factory-genuine Graco equipment. Our Alabama coverage spans 44 cities and towns — among them Alabaster, Albertville, Anniston.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.
Wherever you are in Alabama, the same stock and the same dispatch times apply.
Working outside Madison? Browse every Alabama city we ship to to find your area.
Find Us on Google
Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Madison.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.