Buy Graco Spray Hoses in Carson

Yes — we ship to all 0 Carson ZIP codes, including , and across California. Order before 1 PM CST and it leaves that day.

Match the bore to the run length and tip size, not just the pump. As a working rule: 1/4" suits short runs and small tips, 3/8" is the standard for most contractor work, and 1/2" is for long runs or high-output machines. On a long run, stepping up a size recovers the pressure you would otherwise lose.

It is the soft section connecting your main line to the gun. Main airless hose is stiff, and dragging it around all day is what wears out your wrist. Most painters will not work without one.

Always rate to the pump's peak output. Most contractor airless hose is 4000 PSI, which suits the majority of machines. Larger and protective-coating pumps need the 7250 PSI Xtreme-Duty range. Do not run under-rated hose under any circumstances.

Yes, provided the coupler matches the hose rating. Keep both sections the same bore so you do not create a restriction. Couplers and swivels are in adapters and fittings. On very long runs, a larger bore beats joining more of the same.

Airless pressure is in a different class to shop air. Genuine Graco hose is pressure-tested and correctly coupled at the ends. Blowouts almost always start at the coupling.