Buy Graco Spray Hoses in Herriman

Yes — we ship to all 0 Herriman ZIP codes, including , and across Utah. Orders placed by 1 PM CST ship the same business day.

Bore is decided by how far you are spraying and how big the tip is. As a working rule: 1/4" suits short runs and small tips, 3/8" is the standard for most contractor work, and 1/2" is for long runs or high-output machines. An undersized bore over distance starves the gun no matter what the pump does.

It is a short, flexible length between the main hose and the gun. Heavy hose fights you at the gun; a whip takes that out. It is one of the cheapest comfort upgrades on the job.

The hose must be rated at or above the pump's maximum, not its working pressure. Most contractor airless hose is 4000 PSI, which suits the majority of machines. High-output and Xtreme pumps require the 7250 PSI line. An under-rated hose is a safety issue, not a performance one.

Yes, with a proper coupler rated to the same pressure. Mixing bores mid-run creates a choke point. Couplers and swivels are in adapters and fittings. Beyond a certain distance, go up a size rather than add length.

Airless hose carries paint at thousands of PSI — it is not general-purpose hose. OEM hose is tested and the fittings are swaged properly. A poorly crimped end is where an unrated hose lets go.