Buy Graco Spray Hoses in Franklin
Factory-original Graco hose, correctly rated and coupled, dispatched to Franklin without a distributor in the middle. BlueMax II, Xtreme-Duty, whip hose and texture line in stock.
Delivering across Franklin
2 ZIP codes served:
53132, 53221
−15%
−26%
−26%
Which Hose Suits Franklin Work?
The hose does more to the spray pattern than most people expect. Every extra foot costs pressure, and a narrow bore costs more of it. Under-size it and the pump works harder for a worse fan. Here is how the ranges divide for crews across Franklin and the wider Wisconsin area.
Airless Hose
BlueMax II, 1/4" and 3/8". The standard run between pump and whip at 4000 PSI.
Whip Hose
3 to 6 ft at the gun. Saves your hand over a long day.
High Pressure
Xtreme-Duty to 7250 PSI. Protective coatings and long runs.
Texture & Material
1" and 1.25" bore. Drywall texture and aggregate material.
Hose ranges we stock
Serving Franklin and the wider Wisconsin area
- BlueMax II Airless — 3/16" to 1/2", coupled and ready
- Whip Hose — flexible leader at the gun
- Xtreme-Duty High Pressure — rated to 7250 PSI
- Texture & Material Hose — 1" and 1.25" bore
- Fittings & Swivels — couplers, unions, swivels
- Gun & Hose Kits — matched gun, hose and tip
Not sure what fits?
Send the model, how far you need to reach and the tip you run and we will size the bore and pressure rating together — both have to suit the pump or you lose pressure at the gun.
+1 713-931-4102 or browse every hose →We also ship to 8 nearby Wisconsin communities
Madison, Ashwaubenon, Menasha, Watertown, Bellevue, Neenah, Onalaska, West-allis
Buying Spray Hose in Franklin — Common Questions
Straight answers for painters and contractors in Franklin, Wisconsin.
Do you deliver spray hose to Franklin?
Yes — we ship to all 2 Franklin ZIP codes, including 53132, and across Wisconsin. Same-day dispatch applies to orders in before 1 PM CST.
What hose diameter do I need?
Length and tip orifice drive the diameter more than pump size does. As a working rule: 1/4" suits short runs and small tips, 3/8" is the standard for most contractor work, and 1/2" is for long runs or high-output machines. Added length means added pressure drop, so going up a size on a long run keeps the fan full.
What is a whip hose for?
A whip is a 3 to 6 ft flexible leader at the gun end. It keeps the stiff main line off the gun so the gun moves freely. Most crews treat it as essential rather than optional.
What pressure rating do I need?
Rate the hose to what the machine can produce at full stroke, not what you normally spray at. Most contractor airless hose is 4000 PSI, which suits the majority of machines. Anything running protective coatings usually needs the higher rating. Never fit a hose rated below your pump.
Can I join two hoses to reach further?
Yes — use a rated union, not a hardware-store fitting. A narrower section anywhere in the line limits the whole run. Couplers and swivels are in adapters and fittings. Past a long total length, step the whole run up a size instead.
Why not just use generic hose?
These pressures are far beyond ordinary air or water line. The couplings matter as much as the hose itself. Most failures happen at a badly fitted end, not in the middle of the hose.
Graco Spray Hoses for Franklin, Wisconsin
Sprayersandparts.com is your online source for Graco airless sprayers, spray guns, hoses, and genuine OEM repair parts in Franklin, Wisconsin. We process orders daily and ship throughout the Franklin area (53132, 53221). Our catalog extends beyond parts: we carry complete Graco airless sprayer packages, HVLP turbine and spray gun systems, texture sprayer setups, and line striping equipment — everything a painting contractor in Wisconsin needs to stay productive. Sprayersandparts.com stands behind every order with responsive customer support. If you're unsure which part fits your model, contact us with your sprayer's serial number and we'll confirm compatibility before you buy.
We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 2 Franklin ZIP codes (53132, 53221). Order by 1 PM CST and it ships same day, tracked.
Why it matters: it is the least expensive component and the one that ends the day when it goes — one spare hose beats one lost job.
Serving Painters Across Wisconsin
Graco's service life depends heavily on correct maintenance and genuine parts. For Franklin, Wisconsin painters who rely on their sprayers daily, keeping a stock of key OEM components — tips, filters, and a piston pump repair kit — is standard professional practice. For Franklin, Wisconsin painting professionals, Sprayersandparts.com is the straightforward solution: genuine Graco parts, a full sprayer catalog, fast shipping, and support when you need help identifying what your sprayer needs.
Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.
From small residential jobs to full commercial repaints, Wisconsin contractors source Graco parts through Sprayers and Parts. Our Wisconsin coverage spans 55 cities and towns — among them Appleton, Ashwaubenon, Beaver Dam.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.
Wherever you are in Wisconsin, the same stock and the same dispatch times apply.
Working outside Franklin? Browse every Wisconsin city we ship to to find your area.
Find Us on Google
Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Franklin.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.