Graco 218131 Gun Filter Assembly

Graco 218131 Gun Filter Assembly is a 50-mesh in-handle filter designed to prevent clogs and ensure a smooth, professional spray finish. Ideal for latex paints and primers, it fits several popular Graco spray guns.

Fits SG2, SG3, and Original Contractor Gun
Compatible with Magnum X5, X7, ProX17, ProX19, Project Painter Plus & similar sprayers
50-mesh screen filters debris and prevents tip plugging
Ensures cleaner flow and longer gun life

$12.9

Based on 0 reviews

Description

Compatibility & Key Details for 218131

Compatible Machines (Sprayers)

This Graco 218131 Gun Filter Assembly (50-mesh) fits Graco airless spray guns listed below and any sprayer that ships with those guns.

Magnum Project Painter Plus (with SG2 gun)
Magnum X5 (with SG2 gun)
Magnum X7 (with SG2 gun)
Magnum LTS 15 / LTS 17 retail variants (with SG2 gun)
Magnum ProX17 (with SG3 gun)
Magnum ProX19 (with SG3 gun)
Any sprayer using the Original Contractor Gun (legacy “Contractor” style)

What the 218131 Filter Does

The Graco 218131 Gun Filter Assembly is a 50-mesh in-handle filter for airless guns (e.g., SG2, SG3, and Original Contractor Gun). It screens out debris before the tip to reduce tip plugging, improve finish quality, and protect your sprayer.

Key Specs

Attribute	Detail
Part Number	218131
Type	Gun Filter Assembly (in-handle)
Mesh Rating	50-mesh (ideal for latex paints & primers)
For Use With	SG2, SG3, Original Contractor Gun
Primary Benefit	Reduces debris to prevent tip clogs and improve spray pattern

What’s Included

One (1) Graco 218131 Gun Filter Assembly (50-mesh)

Installation & Care Tips

Always relieve pressure before opening the gun handle and removing the filter.
Clean the filter with water (for water-based) or appropriate solvent (for oil-based) until clear.
Replace the filter when damaged, deformed, or after persistent clogging.
Match mesh to material: 50-mesh for latex/primers; use finer mesh for thinner coatings.

Frequently Asked Questions

No. It specifically fits guns designed for this assembly: SG2, SG3, and the Original Contractor Gun. For other guns (Contractor PC, FTx, etc.), verify the correct filter part number in the gun’s parts list.

50-mesh is well-suited to most latex paints and primers. For thinner materials (stains, lacquers), a finer mesh may improve finish and reduce nibs.

Replace if the filter is torn, crushed, permanently discolored, or if you experience frequent tip clogs and flow restriction even after thorough cleaning.

It’s not recommended. The gun filter protects the tip and improves finish quality. Running without it increases the risk of debris causing tip plugging and poor patterns.

Always relieve pressure, remove the handle cap, swap the filter, and reinstall firmly. Prime/flush after replacement to purge trapped debris.