Graco 224458 Manifold Filter Long 30 mesh 2 pk

Keep your Graco sprayer protected and performing smoothly with the Graco 224458 Manifold Filter Long 30 Mesh (2-Pack). Designed for heavy coatings, it filters debris before it reaches the gun or tip.

Part Number: 224458
Mesh Size: 30-mesh (coarse)
Style: Long / Vertical filter element
Pack Quantity: 2 filters per pack
Used With: Ultra Max™, GMAX®, GH™ 200, and HydraMax™ sprayers

$42.9

Based on 0 reviews

Description

Part Overview for Contractors & Maintainers

Compatible Machines

This long, vertical manifold filter is used across many professional Graco airless sprayers. Based on vendor/manufacturer info, it’s commonly used in the following series:

Graco Ultra Max™ Series
Graco GMAX® Series
Graco GH™ 200 Series
Graco HydraMax™ Series

Keep your sprayer flowing with the Graco 224458 Manifold Filter Long 30 Mesh (2-Pack)—a coarse filtration element designed to trap larger debris in the manifold and protect hoses, guns, and tips when spraying heavier coatings.

Key Features

30-mesh coarse filtration ideal for heavier materials (e.g., heavy latex, elastomerics).
Long / vertical style element for compatible manifold housings.
2-pack value—swap a clean spare in seconds and keep spraying.
Helps reduce tip clogs and extends downstream component life.

Specifications

Part Number	224458
Type	Manifold (Outlet) Filter – Long / Vertical
Mesh Rating	30 mesh (coarse)
Pack Qty	2 filters per pack
Typical Materials	Heavy latex, block fillers, elastomeric & other high-build coatings
Typical Series Fit	Ultra Max™, GMAX®, GH™ 200, HydraMax™ (verify by manual)

Selection & Use Tips

Choose 30-mesh for heavy-bodied paints; use a finer mesh (e.g., 60/100/200) for thinner materials and fine-finish work.
Replace filters regularly—if you notice pressure spikes or frequent tip clogs, install a fresh filter.
Always match the filter length/style to your manifold housing (this part is the long/vertical style).

Frequently Asked Questions

30-mesh is a coarse screen that allows heavier coatings to pass while catching large debris. It’s commonly used for heavy latex, block fillers, and elastomerics to reduce tip clogs.

Check your sprayer’s parts manual for the manifold/outlet filter. If it specifies a long/vertical element and 30-mesh (or lists part 224458), you’re good. If the manual calls for a shorter element or different mesh, select the matching part number.

Many manifolds accept the same length/style in different meshes. If your housing is the long/vertical type, you can typically swap to a finer mesh for thinner materials—just ensure the length and style match your housing spec.

Replace when you see restricted flow, pressure fluctuations, frequent tip clogs, or visible damage. Many pros keep a 2-pack on hand and rotate a clean filter in daily or at material changes.

Yes—by trapping debris before it reaches the hose and gun, the Graco 224458 helps reduce wear on tips and seats, improving consistency and component longevity.