Graco 224459 Long Manifold Filter 60 Mesh (2 Pk)

Graco 224459 Long Manifold Filter 60 Mesh (2 Pk) ensures consistent spray performance by filtering debris before it reaches the spray tip. Ideal for latex primers, paints, and enamels.

Mesh Size: 60-mesh for latex coatings
Type: Long manifold filter – pack of 2
Prevents: Tip clogs and uneven spray patterns
Fits: Graco Ultra Max, GMax, LineLazer, Xtreme, King, and more

$42.9

Based on 0 reviews

Description

Overview & Compatibility — Graco 224459 Manifold Filter Long 60 Mesh (2 Pk)

Compatible Machines

This long-style, 60-mesh manifold filter fits a wide range of Graco professional sprayers that use the long (integral/external) filter screen.

Xtreme: 85cc, 115cc, 145cc (600), 180cc (750), 220cc (900), 250cc (1045)
King: 45:1 (HydraCat), 56:1, 63:1
Premier: 45:1, 74:1
President: 10:1, 15:1
Monark: 10:1, 23:1
Senator: 13:1 (HydraCat), 35:1
Bulldog: 30:1, 33:1 (also Dura-Flo 750)
Dura-Flo: 900, 1100, 1800
Ultra airless: 333, 400, 433, 500, 750, 1000, 1500
Ultra Max: 695, 795, 1095, 1595
Ultimate / Ultimate Plus / Ultimate MX: 500, 600, 900, 1000, 1500, MX 695, MX 795, MX 1095, MX 1595
GMax: 3900, 5900, 5900 HD, 7900, 10,000
LineLazer: 3000, 3500, 5000, II 3900, II 5900
RoadLazer; Nova (Ultra-style), Nova SP, Nova SPx; Super Nova, Super Nova 700, Super Nova SP, Super Nova SPx
EuroPro: 495, 695, 795, 1095
Gas/Hydraulic/Electric series often listed with this screen: EH 333, EH 433, EH 433 GT, EM 380/390/400/480/490/5000/590; GM 10,000/1030/1230/3000/3012/3500/5000/7000

What it is

The Graco 224459 Manifold Filter Long 60 Mesh (2 Pk) is a long-style pump/manifold screen that helps prevent tip clogs and wear by trapping debris before it reaches the gun. 60-mesh is commonly recommended for latex primer, latex paints, and latex enamels.

Specifications

Part Number	224459
Style / Length	Long manifold filter screen (fits long/integral or external filter housings)
Mesh Rating	60 mesh (latex primer/paints/enamels)
Pack Quantity	2 filters per pack
Typical Use	General interior/exterior coatings where 60-mesh filtration is specified (latex, acrylics)
Associated Long-filter Family	30 mesh (224458), 60 mesh (224459), 100 mesh (224468), 200 mesh (224469)

Why this filter matters

Helps maintain consistent spray pattern and pressure by filtering debris at the pump.
Reduces tip clogs and downtime; extends pump and tip life.
Correct mesh selection (60-mesh for latex) improves flow and finish quality.

Fit & Selection Guide

Housing type: For sprayers that specify a long manifold screen. If your sprayer uses “short/Easy-Out” filters, choose the short version.
Material type: 60-mesh is ideal for latex primers/paints/enamels. For finer finishes, consider 100–200 mesh if specified by the machine and coating.
Confirm by manual: Check your sprayer’s parts list — look for “Strainer/Filter, 60 mesh, long” or the exact part number 224459.

Frequently Asked Questions

60-mesh is commonly specified for latex primer, latex paints, and latex enamels. Always follow both sprayer and coating manufacturer guidance.

Check your parts manual for “long manifold filter” or the 2244xx family. Xtreme/King and many Ultra/Ultra Max/LineLazer/GMax packages list long filters; some models use short/Easy-Out screens instead. Match what your manual specifies.

Many Ultra Max packages that specify a long manifold screen list 224459 for 60-mesh. Verify your exact variant’s parts list to confirm before ordering.

Inspect/clean daily (or when flow/pressure drops) and replace if the screen is damaged, deformed, or cannot be cleaned fully. Heavy materials and dirty job sites require more frequent service.

Yes. Common long-filter options include 30-mesh (224458), 60-mesh (224459), 100-mesh (224468), and 200-mesh (224469). Choose based on coating and tip size.