Graco 243081 Pump Manifold Filter - 100 mesh

The Graco 243081 Pump Manifold Filter – 100 Mesh keeps your sprayer performing efficiently by filtering debris before it reaches the pump and spray tip. Designed for professional results and easy maintenance.

Part Number: 243081
Type: Easy Out Pump Manifold Filter
Mesh Size: 100-mesh (best for thinner coatings like stains and sealers)
Compatible Models: ES & GS Series, Pro190ES, Pro210ES, Pro270ES, ST PRO, Magnum A100 ProPlus
Benefits: Reduces tip clogging, ensures smooth spray pattern, and extends sprayer life.

$17.9

Based on 0 reviews

Description

Compatible Machines – Graco 243081 (100-Mesh)

Use this list to quickly confirm if the Graco 243081 Pump Manifold Filter – 100 Mesh fits your sprayer.

Graco ES Series airless paint sprayers (all ES models)
Graco GS Series airless paint sprayers (all GS models)
ST PRO Airless Sprayers
Pro190ES Stand
Pro190ES Cart
Pro210ES Stand
Pro210ES Cart
Pro270ES Stand
Pro270ES Cart
Magnum A100 ProPlus

Product Overview

The Graco 243081 Pump Manifold Filter – 100 Mesh is an Easy Out full-flow filter that uses the entire mesh surface to maximize filtration and reduce clogs. It protects the pump and gun by catching debris before it reaches critical components, helping your sprayer run smoother and last longer.

Key Benefits

Full-flow design for consistent pressure and smooth spray pattern.
Easy Out construction for quick change/cleaning between jobs.
100-mesh screening optimized for stains, sealers, and clear coats.
Reduces tip clogging and minimizes downtime on site.

Specs & Sizing

Attribute	Detail
Part #	243081
Type	Easy Out Pump Manifold Filter
Mesh	100-mesh (fine; best for thinner materials)
Typical Size	Approx. 4.25" H × 1" W × 1.25" D (for reference)
Use Case	Filtering debris before pump manifold to protect pump & spray tip

When to Choose 100-Mesh

Thin coatings: stains, lacquers, clear finishes.
Finish work requiring smooth, consistent atomization.
Switch to coarser mesh for heavy body paints or when flow starvation occurs.

Installation & Care

Always depressurize the sprayer before servicing.
Remove the manifold cap, swap in the 243081 filter, and seat it correctly.
Clean regularly—if you see frequent debris buildup, also check your suction strainer.
Keep spares on hand to avoid downtime between materials or color changes.

Frequently Asked Questions

Yes. The Graco 243081 Pump Manifold Filter – 100 Mesh is listed for all ES and GS series airless sprayers and specific models including ST PRO, Pro190ES (Stand/Cart), Pro210ES (Stand/Cart), Pro270ES (Stand/Cart), and Magnum A100 ProPlus. If in doubt, verify against your exact model and serial number.

Choose 100-mesh for thinner materials—stains, sealers, lacquers, and clear coats—where fine filtration improves finish quality without restricting flow. For heavier latex paints, step up to a coarser mesh to avoid unnecessary pressure drop.

Inspect after each job. Clean when buildup is visible or spray pattern weakens; replace if the mesh is torn, crushed, or will not rinse clean. Keeping a spare minimizes downtime between material changes.

Yes. By capturing debris upstream, the 243081 helps maintain consistent pressure, reduces tip clogging, and supports a smoother spray pattern for professional finishes.

Yes, it’s a genuine Graco Easy Out Pump Manifold Filter with part number 243081, engineered for durability and performance in compatible Graco sprayers.