Graco 248205 Gb Kit,Repair,Pump,Ultramax 2
$911.40
$1,085.00
Save 16%
In Stock
The Graco 248205 Pump Repair Kit is a genuine fluid section assembly designed to restore full spraying performance in UltraMax II and Ultimate MX II sprayers. It comes pre-assembled and pressure-tested for quick, reliable installation.
- Part Number: 248205
- Fits: UltraMax II 1095 / 1595 & Ultimate MX II 1095 / 1595
- Max Pressure: 3,300 psi (227 bar)
- Includes: Complete fluid section with piston, packings, valves & seals
- OEM Quality: Genuine Graco tested performance
Quantity
Genuine OEM Part
Fast Shipping (Order by 1 PM CST)
Easy Returns
Restore pump performance with the genuine Graco 248205 fluid section
Compatible Machines
- UltraMax II 1095 (Hi-Boy/Lo-Boy variants)
- UltraMax II 1595 (Hi-Boy/Lo-Boy variants)
- Ultimate MX II 1095 (Standard / Premium)
- Ultimate MX II 1595 (Standard / Premium)
Product Overview
The Graco 248205 (often listed as “GB Kit, Repair, Pump, UltraMax II”) is a complete fluid section / displacement pump assembly designed for direct replacement on the machines listed above. It arrives pre-assembled and pressure-tested so you can swap the lower in minutes and get back to spraying.
Key Benefits
- OEM fit & reliability for UltraMax II / Ultimate MX II 1095 & 1595.
- Pre-assembled lower minimizes downtime—no bench-building of packings.
- Restores pressure & smooth flow when your existing lower is worn.
- Designed for 3,300 psi (227 bar) airless applications.
What’s in the Box (typical)
- Pre-built displacement pump / fluid section
- Piston & cylinder assembly
- Packing stack (pre-set)
- Intake / outlet valves with balls & seats
- Seals, gaskets, and required fasteners for the lower
Technical Details
| Part Number | 248205 |
|---|---|
| Type | Fluid Section / Displacement Pump Assembly |
| Max Working Pressure | 3,300 psi (227 bar) |
| Compatible Series | UltraMax II & Ultimate MX II (1095, 1595) |
| Typical Coatings | Latex, acrylics, primers, enamels, and similar materials suited for airless spray* |
Fitment & Installation Notes
- Confirm your sprayer’s exact model & serial (data plate) before ordering.
- Relieve pressure completely and follow Graco lock-out procedures before service.
- Lubricate packings as recommended; prime the unit and check for leaks after install.
- Use only genuine Graco parts to maintain performance and warranty.
Frequently Asked Questions
Match your unit to the families listed under Compatible Machines (UltraMax II / Ultimate MX II 1095 or 1595). For special editions, confirm via model & serial or consult the sprayer parts list to ensure the lower is specified as 248205.
Loss of pressure, surging/pulsation, material bypass at packings, or poor atomization after routine maintenance are common indicators. A complete lower like 248205 restores the pump’s core components in one step.
No specialty tools are typically required beyond standard hand tools. Follow the service manual torque values and safety steps. Always relieve pressure and unplug the unit before disassembly.
The Graco 248205 lower is designed for up to 3,300 psi (227 bar). Always use hoses and guns with equal or higher pressure ratings.
Filter paint properly, use the correct mesh manifold filter, keep packings lubricated per Graco guidance, and flush with a compatible solvent after each use. Store with pump protectant when idle.
No reviews yet. Be the first to review this product!
