Buy Graco Spray Hoses in Bedford
Factory-original Graco hose, correctly rated and coupled, dispatched to Bedford without a distributor in the middle. BlueMax II, Xtreme-Duty, whip hose and texture line in stock.
Delivering across Bedford
5 ZIP codes served:
10506, 10507, 10536, 10549, 10576
−15%
−26%
−26%
Which Hose Suits Bedford Work?
The hose does more to the spray pattern than most people expect. Every extra foot costs pressure, and a narrow bore costs more of it. Under-size it and the pump works harder for a worse fan. Here is how the ranges divide for crews across Bedford and the wider New York area.
Airless Hose
BlueMax II, 1/4" and 3/8". The standard run between pump and whip at 4000 PSI.
Whip Hose
3 to 6 ft at the gun. Saves your hand over a long day.
High Pressure
Xtreme-Duty to 7250 PSI. Protective coatings and long runs.
Texture & Material
1" and 1.25" bore. Drywall texture and aggregate material.
Hose ranges we stock
Serving Bedford and the wider New York area
- BlueMax II Airless — 3/16" to 1/2", coupled and ready
- Whip Hose — flexible leader at the gun
- Xtreme-Duty High Pressure — rated to 7250 PSI
- Texture & Material Hose — 1" and 1.25" bore
- Fittings & Swivels — couplers, unions, swivels
- Gun & Hose Kits — matched gun, hose and tip
Not sure what fits?
Send the model, how far you need to reach and the tip you run and we will size the bore and pressure rating together — both have to suit the pump or you lose pressure at the gun.
+1 713-931-4102 or browse every hose →We also ship to 8 nearby New York communities
Rockville-centre, Perinton, Depew, Rome, Bethlehem, North-valley-stream, Parma, Queens
Buying Spray Hose in Bedford — Common Questions
Straight answers for painters and contractors in Bedford, New York.
Do you deliver spray hose to Bedford?
Yes — we ship to all 5 Bedford ZIP codes, including 10506, and across New York. Same-day dispatch applies to orders in before 1 PM CST.
What hose diameter do I need?
Length and tip orifice drive the diameter more than pump size does. As a working rule: 1/4" suits short runs and small tips, 3/8" is the standard for most contractor work, and 1/2" is for long runs or high-output machines. Added length means added pressure drop, so going up a size on a long run keeps the fan full.
What is a whip hose for?
A whip is a 3 to 6 ft flexible leader at the gun end. It keeps the stiff main line off the gun so the gun moves freely. Most crews treat it as essential rather than optional.
What pressure rating do I need?
Rate the hose to what the machine can produce at full stroke, not what you normally spray at. Most contractor airless hose is 4000 PSI, which suits the majority of machines. Anything running protective coatings usually needs the higher rating. Never fit a hose rated below your pump.
Can I join two hoses to reach further?
Yes — use a rated union, not a hardware-store fitting. A narrower section anywhere in the line limits the whole run. Couplers and swivels are in adapters and fittings. Past a long total length, step the whole run up a size instead.
Why not just use generic hose?
These pressures are far beyond ordinary air or water line. The couplings matter as much as the hose itself. Most failures happen at a badly fitted end, not in the middle of the hose.
Graco Spray Hoses for Bedford, New York
Looking for genuine Graco airless paint sprayers and OEM replacement parts in Bedford, New York? Sprayersandparts.com ships directly to Bedford and the surrounding (10506, 10507, 10536, 10549, and surrounding) zip codes, so you get the exact parts you need without delay. Need a hard-to-find Graco part? We carry spray gun repair kits, needle and seat assemblies, inlet strainers, displacement rod sets, connecting rod kits, outlet valve assemblies, cylinder and piston sets, and pressure transducers — all genuine Graco OEM. We process and ship orders to Bedford every business day. Genuine Graco parts, competitive pricing, and real customer support make Sprayersandparts.com the choice for painters and contractors who can't afford to wait.
We carry real depth on fast-wearing components — packings, filters, spray tips and pressure controls — and ship to all 5 Bedford ZIP codes (10506, 10507, 10536, 10549, 10576). Anything ordered before 1 PM CST leaves that day.
Why it matters: it is the least expensive component and the one that ends the day when it goes — one spare hose beats one lost job.
Serving Painters Across New York
The difference between genuine Graco parts and aftermarket copies is measurable: tighter tolerances, materials specified to Graco's engineering standards, and compatibility guaranteed for the exact model you own. Painters in Bedford, New York who work professionally choose OEM for a reason. Painters in Bedford, New York can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Tell us your model and serial number and we will confirm the exact part before you order. We ship direct instead of running a counter, which lets us hold parts for machines twenty years old.
Across New York, painting crews and property maintenance teams order their Graco parts from Sprayers and Parts. Orders go out daily to 222 New York locations, including Albany, Amherst, Amsterdam.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.
Wherever you are in New York, the same stock and the same dispatch times apply.
Working outside Bedford? Browse every New York city we ship to to find your area.
Find Us on Google
Check our profile, ratings and opening hours on our Google Business Profile — then order online for delivery to Bedford.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.