Graco 1595 IronMan Sprayer Parts

Unlock Maximum Uptime with Genuine Graco 1595 IronMan Sprayer Parts & Kits

When an exterior repaint, warehouse floor, or high-build fire-proofing job is on the line, pros reach for Graco Ultra Max II 1595 IronMan —the largest electric sprayer in Graco’s arsenal and a benchmark for output, reliability, and job-site ruggedness. At SprayersAndParts, we keep every OEM piston, valve, and circuit board in stock, and clear searchable diagrams. Whether you maintain fleets of gas powered paint sprayers or need a single graco drywall skimming blade for tomorrow’s skim-coat, our one-stop catalog gets you from spec to checkout in minutes.

What Makes the 1595 IronMan the Contractor’s Workhorse?

• 2.8 hp brushless DC motor delivers silent torque and sprays up to 1.5 gpm, letting crews run 200 ft hoses without starving the gun.
• Endurance Vortex MaxLife Extreme™ Pump—chromed, hardened steel with swirl-flow technology doubles rod and sleeve life under abrasive industrial coatings.
• BlueLink™ connectivity logs hours, pressure, and location on each spray session, so fleet managers can schedule preventive maintenance, locate units, and curb theft.
• Flat-proof tires & crush-proof inlet strainer shrug off debris-strewn commercial sites.
• ProConnect 2 pump swap cuts a blown lower replacement to under three minutes —a lifesaver on multi-shift high-rise projects.

Core Performance Specs at a Glance

Need numbers for your bid? Here are the headline figures:

• Maximum working pressure: 3,300 psi / 228 bar 
• Maximum flow rate: 1.35–1.50 gpm, depending on tip size and coating viscosity
• Maximum tip size: 0.039 in (RAC X) for heavy elastomerics 
• Recommended production: 75–125 gal per week for three-man crews.
• Power requirement: single-phase 120 V, no hard-start spikes thanks to soft-start electronics.

Five Reasons OEM Graco Parts Outperform Aftermarket

1. Precision machining. Seals are ground to ±0.001 in to maintain 3,300 psi without creep—critical when dialing in a drywall skimming blade finish.
2. Chemical-compatibility testing. Viton®, leather, and UHMWPE packings pass 1,000-hour immersion against flammable and waterborne coatings, far above generic specs.
3. Iron-clad warranty. Only OEM components keep the pump and drive under Graco’s 12-month coverage.
4. BlueLink part verification. Serialized sensors flag non-OEM boards, protecting your fleet’s data security.
5. Resale premium. Sprayers rebuilt with genuine kits fetch up to 18 % more at auction.

Cross-Platform Compatibility: Stock One Drawer, Service Many Rigs

The 1595 shares its DNA with several other Graco legends, making your parts budget stretch further:

• Ultra Max II 695 | 795 | 1095—same SmartControl boards, RAC X tip guards, and Vortex pump lower (short-stroke for 695, long-stroke for 795/1095).
• Graco Ultra 395 PC—identical Contractor PC gun cartridge and 60-mesh manifold filters; swap tips on finishing jobs without buying duplicates.
• GMax II 7900 gas powered paint sprayers—BlueMax II hoses, Easy-Out filters, and RAC X tips cross-fit, simplifying field kits.
• Handheld TrueCoat 360 Electric TrueAirless Sprayer—LP 515/517 tips screw into the same blue guard, ideal for trim touch-ups after rolling walls .
• DIY Magnum lineup. Our Buy Graco X7 and LTS 17 Diagram and Parts page maps part numbers so you can standardize guns and guards across rental and pro fleets.

Accessory Essentials That Turbo-Charge Productivity

Graco extension tools (12–36 in) pair with a drywall skimming blade to back-roll primer in seconds. Add a CleanShot™ valve to fight spitting on architectural soffits, or clip on a JetRoller™ to back-roll stucco in one pass. For floor coatings, a 180° pivot gun halves wrist fatigue and exploits the 1595’s 0.039 tip capacity. Stocking graco ultra 395 pc parts alongside 1595 consumables ensures your finish unit can jump in if the big rig is flushing or swapping filters.

10,000-Hour Maintenance Roadmap

1. Every Day: Purge with FastFlush™ for 45 seconds; grease the packings with TSL.
2. Every 500 gal: Replace the 60-mesh manifold filter and lube cam bearings.
3. Every 1,000 hours: Drop in a ProConnect pump lower—three minutes, one nut—and log the swap in BlueLink.
4. Every 2 years: Change the SmartControl pressure sensor to maintain ±1 % pressure regulation.

Frequently Asked Questions

Can the IronMan spray high-solid elastomeric roof coatings?

Yes—use a 0.037 or 0.039 RAC X tip and keep the pump under 2,800 psi to minimize pack heat.

Does the 1595 run on a portable generator?

The soft-start 2.8 hp motor draws < 20 A at 120 V; a 4,000 W inverter generator handles startup surge comfortably.

Are gas powered paint sprayers faster?

A GMax II 7900 pushes 2.2 gpm versus the IronMan’s 1.5 gpm but sacrifices BlueLink data logging and runs louder. Keep both in fleet for maximum flexibility.

Upgrade Your Fleet—Order OEM Graco 1595 IronMan Parts Now

Add genuine Graco parts from piston kits and V-packs to Graco TrueCoat 360 Electric TrueAirless Sprayer Parts—to your cart today. With industry-leading fulfillment speed, real-world tech insight, and parts compatibility spanning 395, 695, 1095, and GMax gas rigs, SprayersAndParts keeps your crews spraying, earning, and ahead of schedule on every project.