Graco 17V191 Magnum Startup Control Label

The Graco 17V191 Magnum Startup Control Label is an OEM self-adhesive decal that restores the original “START/STARTUP” markings on your Magnum or TrueAirless sprayer control knob.

Fits Magnum X5, X7, LTS 15, and LTS 17
Genuine Graco replacement label for precise alignment
Quick peel-and-stick installation
Durable print for long-term legibility

Based on 0 reviews

Description

Compatible Machines

This label fits the following Graco Magnum / TrueAirless consumer sprayers that use the Start/Startup control-knob graphic:

Magnum X5 (part no. 262800; Series A–D)
Magnum X7 (part no. 262805; Series A–C)
LTS 15 (part no. 257060; Series A–C)
LTS 17 (part no. 257065; Series A–B)
Project Painter Plus (Magnum TrueAirless family)

Part Number	17V191
Item Type	Control-knob label/decal (“Magnum Startup”)
Location on Unit	Pressure/Startup control knob area (front enclosure/control panel)
Fitment Family	Graco Magnum / TrueAirless (models listed above)
Installation	Self-adhesive; apply with knob rotated fully clockwise per manual alignment

Product Overview

The Graco 17V191 Magnum Startup Control Label refreshes worn or missing graphics so users can clearly identify “START/STARTUP” orientation during setup and operation. Using the genuine OEM label preserves correct markings and a professional finish on your sprayer’s enclosure.

When to Replace

Original markings are faded, peeled, or unreadable
Front enclosure or control knob was replaced and needs new label
Refurbishing a used sprayer for optimal usability and resale value

What’s Included

One (1) 17V191 control label

Install Tips (Summary)

Rotate the pressure/control knob fully clockwise.
Clean and dry the knob face/panel area. Test-fit orientation.
Peel backing and apply the label, aligning to the pointer/indicator.
Press firmly around the perimeter for full adhesion.

Refer to your sprayer’s manual for model-specific diagrams and alignment details.

Frequently Asked Questions

Yes. The 17V191 label is used on Magnum X5 and X7 models (and the related LTS 15 and LTS 17) that use the Start/Startup control-knob graphic.

It’s a label/decal only. It provides the printed “START/STARTUP” markings for the control knob area; it does not change electrical or mechanical function.

Clean the surface, rotate the knob fully clockwise, dry completely, then apply the 17V191 with careful alignment to the indicator pointer. Firm pressure helps ensure long-term adhesion.

OEM labels match the original artwork, size, and arc for the knob face, ensuring exact fit and correct Start/Startup markings—critical for safe, correct operation.

In Graco Magnum/TrueAirless documentation, this appears as a “LABEL, control” within the control/pressure knob assembly group for X5, X7, LTS 15, LTS 17 and related kits.