Buy Graco Spray Hoses in Washington
Authentic Graco airless hose with the fittings already swaged on, shipped direct to Washington with no counter wait. Quarter-inch through half-inch, 4000 to 7250 PSI, ready to ship.
Delivering across Washington
4 ZIP codes served:
84737, 84771, 84780, 84790
−15%
−26%
−26%
Which Hose Suits Washington Work?
A hose choice shows up at the tip, not just at the pump. Diameter sets how much pressure you lose over the run. Too narrow, and the gun starves while the pump strains. Here is how the ranges divide for crews across Washington and the wider Utah area.
Airless Hose
BlueMax II, 1/4" and 3/8". General repaint and production work at 4000 PSI.
Whip Hose
3 to 6 ft at the gun. Takes the weight and stiffness off your wrist.
High Pressure
Xtreme-Duty to 7250 PSI. High-build material and big pumps.
Texture & Material
1" and 1.25" bore. Thick material that needs volume, not pressure.
Hose ranges we stock
Serving Washington and the wider Utah area
- BlueMax II Airless — 3/16" to 1/2", coupled and ready
- Whip Hose — flexible leader at the gun
- Xtreme-Duty High Pressure — rated to 7250 PSI
- Texture & Material Hose — 1" and 1.25" bore
- Fittings & Swivels — couplers, unions, swivels
- Gun & Hose Kits — matched gun, hose and tip
Not sure what fits?
Tell us your pump, hose length and tip size and we will size the bore and pressure rating together — the two must match the machine or the fan will not hold.
+1 713-931-4102 or browse every hose →We also ship to 8 nearby Utah communities
Midvale, Kaysville, Draper, Salt-lake-city, Syracuse, South-jordan, Kearns, Holladay
Buying Spray Hose in Washington — Common Questions
Straight answers for painters and contractors in Washington, Utah.
Do you deliver spray hose to Washington?
Yes — we ship to all 4 Washington ZIP codes, including 84737, and across Utah. Order before 1 PM CST and it leaves that day.
What hose diameter do I need?
Match the bore to the run length and tip size, not just the pump. As a working rule: 1/4" suits short runs and small tips, 3/8" is the standard for most contractor work, and 1/2" is for long runs or high-output machines. On a long run, stepping up a size recovers the pressure you would otherwise lose.
What is a whip hose for?
It is the soft section connecting your main line to the gun. Main airless hose is stiff, and dragging it around all day is what wears out your wrist. Most painters will not work without one.
What pressure rating do I need?
Always rate to the pump's peak output. Most contractor airless hose is 4000 PSI, which suits the majority of machines. Larger and protective-coating pumps need the 7250 PSI Xtreme-Duty range. Do not run under-rated hose under any circumstances.
Can I join two hoses to reach further?
Yes, provided the coupler matches the hose rating. Keep both sections the same bore so you do not create a restriction. Couplers and swivels are in adapters and fittings. On very long runs, a larger bore beats joining more of the same.
Why not just use generic hose?
Airless pressure is in a different class to shop air. Genuine Graco hose is pressure-tested and correctly coupled at the ends. Blowouts almost always start at the coupling.
Graco Spray Hoses for Washington, Utah
Washington, Utah professionals trust Sprayersandparts.com for factory-genuine Graco parts and equipment. Whether you need a replacement pump, tip, filter, or a complete airless sprayer, we ship to Washington (84737, 84771, 84780, 84790) quickly and reliably. Professional painters in Utah choose Sprayersandparts.com because we maintain deep stock of Graco's most commonly replaced parts: RAC X tips, pump repair kits, gun filters, suction tubes, and hose assemblies — so you're never waiting weeks for back-ordered items. Choosing genuine Graco parts means your sprayer performs as Graco intended — consistent pressure, reliable atomization, and a longer service life. Order from Sprayersandparts.com today and receive your parts in Washington without the hassle of searching multiple suppliers.
We keep the first-to-fail items on the shelf — packings, filters, spray tips and pressure controls — and ship to all 4 Washington ZIP codes (84737, 84771, 84780, 84790). Orders placed by 1 PM CST ship the same business day.
Worth knowing: nobody plans for a hose failure, and it stops everything when it happens — carrying a spare whip costs less than losing an afternoon.
Serving Painters Across Utah
Graco's service life depends heavily on correct maintenance and genuine parts. For Washington, Utah painters who rely on their sprayers daily, keeping a stock of key OEM components — tips, filters, and a piston pump repair kit — is standard professional practice. Painters in Washington, Utah can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Send your sprayer model and we will verify fitment before you buy. We stock centrally rather than locally, which is why our inventory runs deeper than a regional dealer.
From small residential jobs to full commercial repaints, Utah contractors source Graco parts through Sprayers and Parts. Orders go out daily to 48 Utah locations, including American Fork, Bountiful, Brigham City.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.
Coverage is identical across Utah — same inventory, same cut-off.
Working outside Washington? Browse every Utah city we ship to to find your area.
Find Us on Google
View verified reviews and how to reach us on our Google Business Profile — then order online for delivery to Washington.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.