.png)
Maintain & Upgrade with Precision-Engineered Graco 190ES Stand Parts (Model 255847, 255848)
Graco 190ES Stand (models 255847 & 255848) is a compact classic that has sprayed flawless coats on four continents since the 1990s—provided the wetted section stays factory-fresh. When a rod pits or a filter collapses, the whole crew sits idle while deadlines slip. Pros prevent that nightmare by stocking genuine components from SprayersAndParts.com for graco parts and accessories, where every Chromex® piston, V-Max Blue™ packing and SmartControl™ sensor is hydro-tested, heat-bagged and shipped when you click “Add to Cart.”
Why Demand Genuine Graco 190ES Stand Parts?
- Chromex Rod + MaxLife Seat — 64 Rc nitrided surfaces shrug off titanium-oxide and silica, outlasting stainless “will-fit” copies 3:1.
- V-Max Blue™ Hybrid Packings — UHMW & leather stack seals from 40 °F dawn starts to 110 °F attics without weep-by downtime.
- SmartControl™ Board Compatibility — OEM sensors keep fan width ±1 % from 300 psi varnish to 3 300 psi block-filler; clone boards “hunt” & waste paint.
- ProConnect™ Door Upgrade — drop a new lower in 60 s; avoid the thirty-minute bench-vise shuffle.
- Warranty Intact — Graco honours Endurance™ coverage only with serialized parts. One clone coil voids the lot.
Key Specs at a Glance
| Metric | Value |
|---|---|
| Max Working Pressure | 3 300 psi / 228 bar |
| Max Flow (single gun) | 0.54 gpm / 2 L min |
| Motor | 0.7 kW TEFC universal, 110/220 V |
| Pump Swap Time | < 60 s via ProConnect™ |
| Tip Range | RAC X LP 0.013″–0.021″ • 0.025″ texture |
One Parts Bin • Multiple Machines Protected
Graco standardised stroke length and filter cores across many small electric rigs, so a single 190ES stand kit keeps other profit-makers rolling:
- Magnum Project Painter Plus — Easy-Out™ filters & RAC X guards bolt in for weekend rentals.
- TrueCoat 360 Electric TrueAirless — LP tips & guards allow perfect handheld touch-ups matching main-gun texture.
- Ultra 395 & 490 PC Pro — identical seats, balls, 60-mesh filters & Contractor PC gun cartridges.
- LineLazer 3400 Stripers — graco whip hoses, pressure sensors and gun cartridge cross-fit for night-lane emergencies.
- Gas Paint Sprayers (650 Pro) — Endurance lower & Easy-Out filter stack swap straight on for backup duty.
Top-Moving 190ES Stand Parts
- 255847 / 255848 Endurance™ Pump Lower — Chromex rod, V-Max packings, MaxLife seats; pressure-tested to 5 000 psi.
- 17A226 ProConnect Door Kit — turn a 15-minute pump swap into a 60-second pit-stop.
- Easy-Out™ Filter 3-Pack — 30-mesh yellow (roof coat), 60-mesh black (latex), 100-mesh blue (enamel).
- 240 794 BlueMax II 50 ft Hose — ¼″ ID dual-swivel; pair with 3 ft whip for soffits and stairwells.
- 17G180 RAC X LP 517 Tip + Guard — sprays satin at 1 400 psi; OSHA meter shows 3 dB quieter jobsite.
- Pump Armor™ 1 gal — locks out rust; mandatory per Graco warranty booklet.
Five Habits for a 1 000-Hour 190ES Stand
- Warm Flush 100 °F—latex breaks down 30 % faster; BlueMax liner safe to 160 °F.
- Wet-Cup Discipline—five TSL drops each coffee break; dry cups score Chromex rods by lunch.
- Mesh-to-Tip Rule—30-mesh ≥ 0.025″ tips; 60-mesh 0.017–0.023″; 100-mesh for graco texture sprayer guns.
- Rotate Hose Ends Weekly—balances liner wear, holding SmartControl capacitance true.
- Colour-Code Bins—blue = electric rigs, red = gas, green = handheld; eliminates wrong-kit grabs.
Frequently Asked Questions
Will pump 255847 fit my 190ES Lo-Boy?
Yes—rod stroke identical; reuse existing ProConnect door or install 17A226 upgrade.
Max hose length with 0.021″ tip?
150 ft: ⅜″ BlueMax first 100 ft, ¼″ whip last 50 ft; hold 2 900 psi at the gun.
Can I spray solvent enamel?
Packings solvent-rated; flush mineral spirits, store in Pump Armor™.
Ready to Replace Downtime with Billable Gallons?
Add the Endurance pump, Easy-Out filter kit and LP tip bundle or any graco paint sprayer to your cart. We’ll ship —so tomorrow your 190ES Stand fires first pull, lays down glass-flat coats, and keeps invoices flowing.