Buy Graco Spray Hoses in Folsom
Authentic Graco airless hose with the fittings already swaged on, shipped direct to Folsom with no counter wait. Quarter-inch through half-inch, 4000 to 7250 PSI, ready to ship.
Delivering across Folsom
4 ZIP codes served:
95630, 95671, 95742, 95763
−15%
−26%
−26%
Which Hose Suits Folsom Work?
A hose choice shows up at the tip, not just at the pump. Diameter sets how much pressure you lose over the run. Too narrow, and the gun starves while the pump strains. Here is how the ranges divide for crews across Folsom and the wider California area.
Airless Hose
BlueMax II, 1/4" and 3/8". General repaint and production work at 4000 PSI.
Whip Hose
3 to 6 ft at the gun. Takes the weight and stiffness off your wrist.
High Pressure
Xtreme-Duty to 7250 PSI. High-build material and big pumps.
Texture & Material
1" and 1.25" bore. Thick material that needs volume, not pressure.
Hose ranges we stock
Serving Folsom and the wider California area
- BlueMax II Airless — 3/16" to 1/2", coupled and ready
- Whip Hose — flexible leader at the gun
- Xtreme-Duty High Pressure — rated to 7250 PSI
- Texture & Material Hose — 1" and 1.25" bore
- Fittings & Swivels — couplers, unions, swivels
- Gun & Hose Kits — matched gun, hose and tip
Not sure what fits?
Tell us your pump, hose length and tip size and we will size the bore and pressure rating together — the two must match the machine or the fan will not hold.
+1 713-931-4102 or browse every hose →We also ship to 8 nearby California communities
Seal-beach, Lathrop, Stanton, Arroyo-grande, Lake-elsinore, East-rancho-dominguez, Laguna-hills, Tujunga
Buying Spray Hose in Folsom — Common Questions
Straight answers for painters and contractors in Folsom, California.
Do you deliver spray hose to Folsom?
Yes — we ship to all 4 Folsom ZIP codes, including 95630, and across California. Order before 1 PM CST and it leaves that day.
What hose diameter do I need?
Match the bore to the run length and tip size, not just the pump. As a working rule: 1/4" suits short runs and small tips, 3/8" is the standard for most contractor work, and 1/2" is for long runs or high-output machines. On a long run, stepping up a size recovers the pressure you would otherwise lose.
What is a whip hose for?
It is the soft section connecting your main line to the gun. Main airless hose is stiff, and dragging it around all day is what wears out your wrist. Most painters will not work without one.
What pressure rating do I need?
Always rate to the pump's peak output. Most contractor airless hose is 4000 PSI, which suits the majority of machines. Larger and protective-coating pumps need the 7250 PSI Xtreme-Duty range. Do not run under-rated hose under any circumstances.
Can I join two hoses to reach further?
Yes, provided the coupler matches the hose rating. Keep both sections the same bore so you do not create a restriction. Couplers and swivels are in adapters and fittings. On very long runs, a larger bore beats joining more of the same.
Why not just use generic hose?
Airless pressure is in a different class to shop air. Genuine Graco hose is pressure-tested and correctly coupled at the ends. Blowouts almost always start at the coupling.
Graco Spray Hoses for Folsom, California
Folsom, California professionals trust Sprayersandparts.com for factory-genuine Graco parts and equipment. Whether you need a replacement pump, tip, filter, or a complete airless sprayer, we ship to Folsom (95630, 95671, 95742, 95763) quickly and reliably. Professional painters in California choose Sprayersandparts.com because we maintain deep stock of Graco's most commonly replaced parts: RAC X tips, pump repair kits, gun filters, suction tubes, and hose assemblies — so you're never waiting weeks for back-ordered items. Choosing genuine Graco parts means your sprayer performs as Graco intended — consistent pressure, reliable atomization, and a longer service life. Order from Sprayersandparts.com today and receive your parts in Folsom without the hassle of searching multiple suppliers.
We keep the first-to-fail items on the shelf — packings, filters, spray tips and pressure controls — and ship to all 4 Folsom ZIP codes (95630, 95671, 95742, 95763). Orders placed by 1 PM CST ship the same business day.
Worth knowing: nobody plans for a hose failure, and it stops everything when it happens — carrying a spare whip costs less than losing an afternoon.
Serving Painters Across California
Graco's service life depends heavily on correct maintenance and genuine parts. For Folsom, California painters who rely on their sprayers daily, keeping a stock of key OEM components — tips, filters, and a piston pump repair kit — is standard professional practice. Sprayersandparts.com is committed to keeping Folsom, California painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.
Send your sprayer model and we will verify fitment before you buy. We stock centrally rather than locally, which is why our inventory runs deeper than a regional dealer.
We ship genuine Graco equipment to painting professionals throughout California. Our California coverage spans 427 cities and towns — among them Adelanto, Agoura Hills, Agoura.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.
Coverage is identical across California — same inventory, same cut-off.
Working outside Folsom? Browse every California city we ship to to find your area.
Find Us on Google
View verified reviews and how to reach us on our Google Business Profile — then order online for delivery to Folsom.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.