Graco 795 XT Standard Hi-Boy Filter Parts List

Find, Fit, and Finish Faster with Graco 795 XT Standard Hi-Boy Filter Parts List Essentials

Contractors who spray latex, fire-retardants, and drywall texture demand filtration they can trust Graco 795 XT Standard rides on a rugged 2.3 HP Xtreme Torque motor, regulated by Next-Generation Rapid-Response Pressure Control, and feeds material through a three-stage filtration train that keeps debris out of the Endurance Vortex pump at 3,300 psi all day.

Why Choose Genuine Graco 795 XT Standard Hi-Boy Filter Parts?

• Exact-Fit Machining: OEM bases and caps align the 60-mesh manifold screen within ±0.002 in, protecting the chromed displacement rod from abrasive hit-or-miss wear.
• Triple-Stage Protection: Inlet strainer, Easy-Out manifold filter, and gun screen stop grit before it scars your tip aftermarket copies skip stages.
• Rapid Drain Valve: Heavy-duty prime valve vents pressure in seconds so you can swap mesh without cracking a fitting.
• Warranty Coverage: Preserve Graco’s factory pump warranty with OEM Parts.

Key Filter & Sprayer Specifications

Cross-Platform Compatibility

Stocking one filter kit that fits several rigs slashes downtime. The parts above drop straight into:

• Ultra 795 XT Standard & ProContractor Hi-Boy
• Ultra Max II 695 / 795 (1st & 2nd Gen)
• Ultra Max II 1095 & 1595 (with XT filter base)
• DutyMax GH 230 / 300 when converted to the XT manifold
• GMAX II 7900 gas paint sprayers (filter cap & screen)

How OEM Filtration Saves You Real Money

Longer Pump Life. Every 60-mesh Easy-Out screen traps dried pigment chunks that would otherwise score the piston lab tests show a 35 % increase in packing life versus after-market baskets.

Faster Cleanouts. The vertical Easy-Out design slides free in under 30 seconds; flush, wipe, re-seat, and you’re spraying again no tools required.

Better Finish. Consistent mesh sizing prevents micro-clogs so tips atomize evenly, eliminating tiger-stripes that drive rework costs.

Lower Pressure. Clear fluid paths mean you can dial back to 2,400 psi on trim coats, reducing overspray and tip wear.

Contractor-Approved Bundles

Complete your rebuild with proven graco accessories that pair perfectly with the 795 XT platform:

1. graco spray guard – RAC X tip guard keeps fingers safe and seals leak-free at 3,300 psi.
2. graco spray tips – FF LP low-pressure tips from .010–.021 for buttery trim work.
3. graco suction tube – replace cracked inlet lines before they starve the pump.
4. graco paint sprayer filters – step-down mesh kits 30/60/100 for specialty coatings.
5. graco drywall texture machine – upsell crews moving to high-build fireproofing.
6. drywall skimming blade – feather those edges instantly.
7. Graco TrueCoat 360 Electric TrueAirless Sprayer Parts keep punch-list guns online.

Pro Tips for Long-Term Reliability

Log service hours: Add the BlueLink module and trigger an alert every 50 gal of latex.
Dry-fit first: Spin the manifold cap into the filter base by hand if it binds, clean threads instead of cranking harder.
Swap mesh by material: 60 mesh for interior latex, 30 mesh for elastomeric, 100 mesh for stains. Knowing when to change mesh sizes delivers a visibly smoother coat and cuts tip costs by up to 25 %.
Flush daily: One gallon of warm water saves a $400 pump rod five minutes you’ll never regret.

Ready to Max Out Your 795 XT Productivity?

Click “Add to Cart” now for genuine Graco 795 XT Standard Hi-Boy Filter Parts. Backed by the Graco factory warranty.