Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Oxford, Alabama

Magnum X5 Replacement Parts in Oxford

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Oxford with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Oxford

6 ZIP codes served:
36201, 36203, 36207, 36253, 36260, 36268

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Oxford and the wider Alabama area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Oxford — Common Questions

Straight answers for homeowners repairing their own sprayer in Oxford, Alabama.

Do you ship X5 parts to Oxford?

Yes — we ship to all 6 Oxford ZIP codes, including 36201, and across Alabama. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Oxford, Alabama

Get genuine Graco sprayers and parts delivered to Oxford, Alabama through Sprayersandparts.com. Our inventory covers thousands of OEM components for Magnum, ProX, FinishPro, and Ultra Max series sprayers — all shipping to Oxford (36201, 36203, 36207, 36253, and more). Specialty items like Graco DataTrak displays, SmartControl pressure systems, and DualTip spray gun handles are available alongside everyday consumables such as tips, strainers, and lubricant. We carry parts for both electric and gas-powered Graco sprayer models. All orders ship with tracking, and our support team can help you identify the correct part number for your specific Graco sprayer. For painters in Oxford, Sprayersandparts.com is the reliable online alternative to hunting parts locally.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 6 Oxford ZIP codes (36201, 36203, 36207, 36253, 36260, 36268). Order by 1 PM CST and it ships same day, tracked.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
6 ZIPs
Covered in Oxford alone

Serving Alabama Homes and Workshops

Airless painting in Oxford, Alabama demands reliable equipment. Graco's lineup — from the compact Magnum X5 to the high-volume Ultra Max II 1095 — covers every application scale, and keeping these sprayers running requires genuine OEM parts, not substitutes that can wear prematurely or fail mid-job. Keep Sprayersandparts.com bookmarked for your Graco parts needs in Oxford, Alabama. From emergency replacements to scheduled maintenance parts, we have the inventory, the shipping speed, and the product knowledge to keep your operation running.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Sprayers and Parts supplies painting contractors across Alabama with factory-genuine Graco equipment. Our Alabama coverage spans 44 cities and towns — among them Alabaster, Albertville, Anniston.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every Alabama order ships from the same warehouse on the same schedule.

Working outside Oxford? Browse every Alabama city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Oxford.

View Our Google Profile
+1 713-931-4102
Fast shipping to Oxford 36201

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Wasn't sure about the fit at first, but for the 289102 Gear and Yoke Repair Kit (Part #289102) and it solved the issue we were having right away. Exactly what was described - no complaints.”
Verified Buyer · Part #289102
“Needed a replacement 243080 Pump Manifold Filter 60 mesh, part number 243080, and it fit perfectly with no modifications needed. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #243080
“Ordered this for a job and this 288891 Finex 2 Needle Packing Kit and it matched the original spec exactly, down to the part number. Part #288891 matched exactly. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #288891
“Needed a replacement 108851 Plain Washer, part number 108851, and shipping was quick and the part was packaged well. No issues at all - does exactly what it should.”
Verified Buyer · Part #108851
“Ordered this for a job and for the 17J244 Hopper Assembly (Part #17J244) and the fit and finish were spot on, no surprises. This is now our go-to for replacement parts.”
Verified Buyer · Part #17J244
“Wasn't sure about the fit at first, but for the 15D049 Coupled 1/4 in x 15-3/4 in Fluid Hose (Part #15D049) and it's been reliable through several jobs since. Exactly what was described - no complaints.”
Verified Buyer · Part #15D049
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart