Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Fremont, California

Magnum X5 Replacement Parts in Fremont

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Fremont with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Fremont

6 ZIP codes served:
94536, 94537, 94538, 94539, 94555, 94587

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Fremont and the wider California area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Fremont — Common Questions

Straight answers for homeowners repairing their own sprayer in Fremont, California.

Do you ship X5 parts to Fremont?

Yes — we ship to all 6 Fremont ZIP codes, including 94536, and across California. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Fremont, California

Whether you're spray-painting walls, ceilings, or exterior surfaces, Sprayersandparts.com provides Fremont, California customers with authentic Graco equipment and parts. Orders to Fremont (94536, 94537, 94538, 94539, and more) ship same or next business day. From Graco Magnum X5 homeowner sprayers to Ultra Max II 1095 Hi-Boy contractor units, Sprayersandparts.com covers the full product range. Parts for every model — pump kits, drive housing assemblies, pressure relief valves, tip filters, and gun components — are in stock and ready to ship. We back every order with easy returns and parts-matching support. Shopping with Sprayersandparts.com means access to genuine Graco quality, fast shipping to Fremont, and real help when you need it.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 6 Fremont ZIP codes (94536, 94537, 94538, 94539, 94555, 94587). Anything ordered before 1 PM CST leaves that day.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
6 ZIPs
Covered in Fremont alone

Serving California Homes and Workshops

For Fremont, California painting contractors, equipment reliability directly affects project schedules and profitability. A worn pump packing, a clogged filter, or a damaged spray tip can stop a crew in its tracks. Stocking a few key Graco OEM replacement parts prevents that scenario. Sprayersandparts.com is committed to keeping Fremont, California painters productive. Genuine Graco parts, fast order processing, and knowledgeable support mean you spend less time sourcing and more time painting.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

We ship genuine Graco equipment to painting professionals throughout California. Our California coverage spans 427 cities and towns — among them Adelanto, Agoura Hills, Agoura.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every California order ships from the same warehouse on the same schedule.

Working outside Fremont? Browse every California city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Fremont.

View Our Google Profile
+1 713-931-4102
Fast shipping to Fremont 94536

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Grabbed one of these on a recommendation, and for the 243814 Coupled Hose (Part #243814) and shipping was quick and the part was packaged well. Saved us a trip to the dealer.”
Verified Buyer · Part #243814
“Our crew has used a few of these now and for the 15C785 Intake Valve Housing (Part #15C785) and it's holding up well after regular use on the job. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #15C785
“The 287030 CleanShot Valve (Part #287030) - it solved the issue we were having right away. Will be ordering more parts from here.”
Verified Buyer · Part #287030
“Wasn't sure about the fit at first, but for the 158674 O-Ring Packing (Part #158674) and it fit perfectly with no modifications needed. Will be ordering more parts from here.”
Verified Buyer · Part #158674
“This was a straightforward swap - this 277064 Glass bead system with two 6-inch dispensers and it matched the original spec exactly, down to the part number. Part #277064 matched exactly. Good value for a genuine Graco part.”
Verified Buyer · Part #277064
“The 118494 Airless Sprayer Suction Hose Packing O-Ring (Part #118494) - it's holding up well after regular use on the job. Glad we found the exact part number we needed.”
Verified Buyer · Part #118494
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart