Magnum X5 Replacement Parts in Orinda
Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Orinda with no counter wait. Nearly every common failure is a stocked, inexpensive item.
Delivering across Orinda
2 ZIP codes served:
94549, 94563
What Your X5 Is Doing, and What Usually Fixes It
Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.
Will Not Prime
Most often a stuck intake ball or split suction tube.
Loses Pressure
Normally worn pump packings.
Spits or Tails
A worn tip gives fingers and tails.
Will Not Start
Control board or enclosure, once power is ruled out.
X5 parts by system
Serving Orinda and the wider California area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby California communities
West-puente-valley, Woodcrest, Brentwood, East-irvine, Lake-forest, Madera, Twentynine-palms, San-luis-obispo
Magnum X5 Parts in Orinda — Common Questions
Straight answers for homeowners repairing their own sprayer in Orinda, California.
Do you ship X5 parts to Orinda?
Yes — we ship to all 2 Orinda ZIP codes, including 94549, and across California. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.
Do X5 and X7 parts interchange?
Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.
My X5 will not prime — what do I change?
Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.
Are these genuine Graco parts?
We stock authentic Graco components only. Copy parts often cost more in the long run than they save.
How do I stop it failing again?
Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.
Magnum X5 Parts for Orinda, California
Contractors and DIY painters in Orinda, California rely on Sprayersandparts.com for authentic Graco sprayers, spray guns, hoses, and repair kits. We serve the Orinda area (94549, 94563) with fast, traceable shipping every business day. From the smallest o-ring to a complete airless pump assembly, Sprayersandparts.com stocks the parts that keep Graco sprayers running. We also carry full replacement spray guns, pressure-relief valve assemblies, motor brushes, and electronic control boards for Ultra Max and GMax models. Shop the Sprayersandparts.com catalog by sprayer model, series, or part category to find exactly what you need. We ship to Orinda quickly and include tracking on every order so you always know where your parts are.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 2 Orinda ZIP codes (94549, 94563). Same-day dispatch on orders in before 1 PM CST.
The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.
Serving California Homes and Workshops
Graco has built its reputation on consistent, high-quality airless spray technology. For painters working in Orinda, California, that reputation matters — on large commercial projects where downtime is costly and on residential jobs where finish quality is everything. Bookmark Sprayersandparts.com as your Graco source for Orinda, California. We maintain inventory year-round, ship every business day, and can help you identify the right part number when you're not sure which component fits your specific unit.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
We ship genuine Graco equipment to painting professionals throughout California. Our California coverage spans 427 cities and towns — among them Adelanto, Agoura Hills, Agoura.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.
Every California order ships from the same warehouse on the same schedule.
Working outside Orinda? Browse every California city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Orinda.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.