Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Parlier, California

Magnum X5 Replacement Parts in Parlier

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Parlier with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Parlier and the wider California area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

Magnum X5 Parts in Parlier — Common Questions

Straight answers for homeowners repairing their own sprayer in Parlier, California.

Do you ship X5 parts to Parlier?

Yes — we ship to all 2 Parlier ZIP codes, including 93648, and across California. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Parlier, California

Contractors and DIY painters in Parlier, California rely on Sprayersandparts.com for authentic Graco sprayers, spray guns, hoses, and repair kits. We serve the Parlier area (93648, 93662) with fast, traceable shipping every business day. From the smallest o-ring to a complete airless pump assembly, Sprayersandparts.com stocks the parts that keep Graco sprayers running. We also carry full replacement spray guns, pressure-relief valve assemblies, motor brushes, and electronic control boards for Ultra Max and GMax models. Shop the Sprayersandparts.com catalog by sprayer model, series, or part category to find exactly what you need. We ship to Parlier quickly and include tracking on every order so you always know where your parts are.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 2 Parlier ZIP codes (93648, 93662). Order by 1 PM CST and it ships same day, tracked.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
2 ZIPs
Covered in Parlier alone

Serving California Homes and Workshops

Running a Graco airless sprayer in Parlier, California means occasionally replacing wear items — tips, filters, pump packings, and inlet valve assemblies. Sourcing those from an authorized dealer ensures they're made to spec and won't void your warranty or shorten your equipment's life. Keep Sprayersandparts.com bookmarked for your Graco parts needs in Parlier, California. From emergency replacements to scheduled maintenance parts, we have the inventory, the shipping speed, and the product knowledge to keep your operation running.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

We ship genuine Graco equipment to painting professionals throughout California. Our California coverage spans 427 cities and towns — among them Adelanto, Agoura Hills, Agoura.We are a direct shipper rather than a walk-in store, which is exactly why we can carry the slow-moving and superseded parts that keep older sprayers running. Same-day dispatch applies to orders in before 1 PM CST, tracked the whole way.

Every California order ships from the same warehouse on the same schedule.

Working outside Parlier? Browse every California city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Parlier.

View Our Google Profile
+1 713-931-4102
Fast shipping to Parlier 93648

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
“Ordered the 17H844 Pump Repair Kit (17H844) for our crew - it's holding up well after regular use on the job. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #17H844
JH
“Needed a replacement 15E813 Jam Nut, part number 15E813, and it solved the issue we were having right away. This is now our go-to for replacement parts.”
Verified Buyer · Part #15E813
“Needed a replacement 24E234 Two Position handle Kit HD, part number 24E234, and installation took less than ten minutes. This is now our go-to for replacement parts.”
Verified Buyer · Part #24E234
“Picked this up to replace a worn part and for the 17P712 Vaccum valve Kit (Part #17P712) and the fit and finish were spot on, no surprises. No issues at all - does exactly what it should.”
Verified Buyer · Part #17P712
“Replaced the OEM part with this one and this 17P550 FlexLiner System 32 oz and the build quality matched what we expect from genuine Graco parts. Part #17P550 matched exactly. Would order again without hesitation.”
Verified Buyer · Part #17P550
“Picked this up to replace a worn part and for the 288933 AirPro Air Spray Pressure Feed Gun (Part #288933) and the build quality matched what we expect from genuine Graco parts. Customer support was helpful when I had questions about fit.”
Verified Buyer · Part #288933
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart