Magnum X5 Replacement Parts in Erie
Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Erie with no counter wait. Nearly every common failure is a stocked, inexpensive item.
Delivering across Erie
3 ZIP codes served:
80026, 80504, 80516
What Your X5 Is Doing, and What Usually Fixes It
Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.
Will Not Prime
Most often a stuck intake ball or split suction tube.
Loses Pressure
Normally worn pump packings.
Spits or Tails
A worn tip gives fingers and tails.
Will Not Start
Control board or enclosure, once power is ruled out.
X5 parts by system
Serving Erie and the wider Colorado area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Colorado communities
Fort-collins, Greeley, Pueblo-west, Lafayette, Westminster, Grand-junction, Canon-city, Littleton
Magnum X5 Parts in Erie — Common Questions
Straight answers for homeowners repairing their own sprayer in Erie, Colorado.
Do you ship X5 parts to Erie?
Yes — we ship to all 3 Erie ZIP codes, including 80026, and across Colorado. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.
Do X5 and X7 parts interchange?
Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.
My X5 will not prime — what do I change?
Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.
Are these genuine Graco parts?
We stock authentic Graco components only. Copy parts often cost more in the long run than they save.
How do I stop it failing again?
Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.
Magnum X5 Parts for Erie, Colorado
Get genuine Graco sprayers and parts delivered to Erie, Colorado through Sprayersandparts.com. Our inventory covers thousands of OEM components for Magnum, ProX, FinishPro, and Ultra Max sEries sprayers — all shipping to Erie (80026, 80504, 80516). Specialty items like Graco DataTrak displays, SmartControl pressure systems, and DualTip spray gun handles are available alongside everyday consumables such as tips, strainers, and lubricant. We carry parts for both electric and gas-powered Graco sprayer models. All orders ship with tracking, and our support team can help you identify the correct part number for your specific Graco sprayer. For painters in Erie, Sprayersandparts.com is the reliable online alternative to hunting parts locally.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 3 Erie ZIP codes (80026, 80504, 80516). Anything ordered before 1 PM CST leaves that day.
The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.
Serving Colorado Homes and Workshops
The difference between genuine Graco parts and aftermarket copies is measurable: tighter tolerances, materials specified to Graco's engineering standards, and compatibility guaranteed for the exact model you own. Painters in Erie, Colorado who work professionally choose OEM for a reason. Keep Sprayersandparts.com bookmarked for your Graco parts needs in Erie, Colorado. From emergency replacements to scheduled maintenance parts, we have the inventory, the shipping speed, and the product knowledge to keep your operation running.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
Sprayers and Parts supplies painting contractors across Colorado with factory-genuine Graco equipment. We currently serve 47 communities across the state, including Arvada, Aurora, Boulder.Stocking direct means we hold depth on the wear items that fail first — packings, filters, tips and pressure controls — instead of ordering them in. Order before 1 PM CST for same-day dispatch and full tracking across Colorado.
Every Colorado order ships from the same warehouse on the same schedule.
Working outside Erie? Browse every Colorado city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Erie.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.