Magnum X5 Replacement Parts in Meriden
Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Meriden with no counter wait. Nearly every common failure is a stocked, inexpensive item.
Delivering across Meriden
3 ZIP codes served:
06450, 06451, 06454
What Your X5 Is Doing, and What Usually Fixes It
Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.
Will Not Prime
Most often a stuck intake ball or split suction tube.
Loses Pressure
Normally worn pump packings.
Spits or Tails
A worn tip gives fingers and tails.
Will Not Start
Control board or enclosure, once power is ruled out.
X5 parts by system
Serving Meriden and the wider Connecticut area
- Pump repair kit — shared across X5 and X7
- Intake valve & suction set — priming faults
- Prime/spray drain valve — will not switch or leaks
- TrueAirless tips — pattern and finish problems
- Hose sets & extensions — reach and replacements
- Control board & enclosure — electrical faults
Not sure which part?
Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.
+1 713-931-4102 or browse the parts diagrams →We also ship to 8 nearby Connecticut communities
Bloomfield, Farmington, Suffield, Willimantic, New-britain, Wolcott, Killingly, Middletown
Magnum X5 Parts in Meriden — Common Questions
Straight answers for homeowners repairing their own sprayer in Meriden, Connecticut.
Do you ship X5 parts to Meriden?
Yes — we ship to all 3 Meriden ZIP codes, including 06450, and across Connecticut. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.
Is it worth repairing an X5, or should I replace it?
In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.
Do X5 and X7 parts interchange?
Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.
My X5 will not prime — what do I change?
Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.
Are these genuine Graco parts?
We stock authentic Graco components only. Copy parts often cost more in the long run than they save.
How do I stop it failing again?
Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.
Magnum X5 Parts for Meriden, Connecticut
Serving Meriden, Connecticut (06450, 06451, 06454) and neighboring communities, Sprayersandparts.com offers the complete lineup of Graco airless paint sprayers, HVLP guns, texture sprayers, and OEM replacement parts at competitive prices. Our catalog includes Graco Magnum X5, X7, ProX19, ProX17, FinishPro HVLP sprayers, Ultra Max II 695, 795 and 1095, and Mark V and Mark X contractor sprayers, plus the full range of Graco repair kits, pump packings, filters, spray tips, tip guards, hoses, and gun parts. Every part we sell is OEM — no aftermarket substitutes. Fast shipping, OEM quality, and straightforward customer service — that's what Meriden customers get when they shop at Sprayersandparts.com. Search by model or part number to find exactly what your Graco sprayer needs.
We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 3 Meriden ZIP codes (06450, 06451, 06454). Anything ordered before 1 PM CST leaves that day.
The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.
Serving Connecticut Homes and Workshops
Graco has built its reputation on consistent, high-quality airless spray technology. For painters working in Meriden, Connecticut, that reputation matters — on large commercial projects where downtime is costly and on residential jobs where finish quality is everything. Painters in Meriden, Connecticut can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.
Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.
Across Connecticut, painting crews and property maintenance teams order their Graco parts from Sprayers and Parts. We deliver to 77 cities statewide, from Ansonia, Avon, Berlin and beyond.Because we operate online rather than through a trade counter, our inventory runs far deeper than a regional dealer — including legacy and discontinued Graco part numbers going back two decades. Anything ordered by 1 PM CST leaves the warehouse that day and is tracked to your door.
Every Connecticut order ships from the same warehouse on the same schedule.
Working outside Meriden? Browse every Connecticut city we ship to to find your area.
Find Us on Google
See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Meriden.
View Our Google ProfileWhat Professionals Say
Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.