Please wait while we process your order...

Free Shipping on Qualifying Orders Fast Shipping — Most Orders Ship Same Business DayOrder by 1 PM CST for fastest dispatchCall +1 713-931-4102
Newark, Delaware

Magnum X5 Replacement Parts in Newark

Authentic Graco components for the Magnum X5, right down to the drain valve, shipped direct to Newark with no counter wait. Nearly every common failure is a stocked, inexpensive item.

Fast Shipping
Order by 1 PM CST
100% OEM
Never aftermarket
Shared Kits
X5 and X7 use the same pump kit

Delivering across Newark

11 ZIP codes served:
19702, 19711, 19712, 19713, 19714, 19715, 19716, 19717, 19718, 19725, 19726

Pump, suction, gun, electrical — and the machine itself

Find it by symptom

What Your X5 Is Doing, and What Usually Fixes It

Nearly every X5 problem is one of four or five things. Working from the symptom is faster than guessing at part numbers. We would rather confirm it than have you order twice.

Will Not Prime

Most often a stuck intake ball or split suction tube.

Loses Pressure

Normally worn pump packings.

Spits or Tails

A worn tip gives fingers and tails.

Will Not Start

Control board or enclosure, once power is ruled out.

X5 parts by system

Serving Newark and the wider Delaware area

Not sure which part?

Describe what the sprayer is doing and we will identify it — symptoms narrow it down faster than exploded views.

+1 713-931-4102 or browse the parts diagrams →

We also ship to 5 nearby Delaware communities

Middletown, Glasgow, Wilmington, Bear, Dover

See every Delaware city we serve →

Magnum X5 Parts in Newark — Common Questions

Straight answers for homeowners repairing their own sprayer in Newark, Delaware.

Do you ship X5 parts to Newark?

Yes — we ship to all 11 Newark ZIP codes, including 19702, and across Delaware. Order before 1 PM CST and it leaves that day. Small parts go out by post, so they arrive quickly.

Is it worth repairing an X5, or should I replace it?

In most cases repairing is clearly worth it. The common kits are a fraction of replacement cost. A seized motor is the one case where a new machine can make sense.

Do X5 and X7 parts interchange?

Many of them do — the pump repair kit covers both. Gun, hose and tip parts are generally interchangeable. Some housing components are X5-only. Send us your model and we will confirm before you order.

My X5 will not prime — what do I change?

Check the inlet valve first, then the suction tube. Set material in the intake is the usual culprit. If the valve is clean and it still will not draw, the pump packings are likely worn.

Are these genuine Graco parts?

We stock authentic Graco components only. Copy parts often cost more in the long run than they save.

How do I stop it failing again?

Clean it properly the same day, every time. Leave protector in the pump, not plain water. Neglect, not wear, is what kills most of them.

Magnum X5 Parts for Newark, Delaware

Sprayersandparts.com supplies Newark, Delaware with authentic Graco airless sprayers and OEM parts. From simple filters and tips to complete pump rebuild kits, every item ships directly to Newark (19702, 19711, 19712, 19713, and more) — no waiting on a local distributor. Our inventory covers Graco's entire residential and contractor sprayer line, including Magnum series (X3, X5, X7, ProX19), TrueCoat, FinishPro HVLP, Ultra Max II, GMax, and King sprayers. We also stock texture sprayer parts for the Graco ToughTek and RTX series. Sprayersandparts.com ships Graco parts to Newark with tracking on every order. Our team is available to help you confirm part compatibility, troubleshoot your sprayer, or advise on the right tip size for your coating and application.

We hold deep stock on the parts that wear out first — packings, filters, spray tips and pressure controls — and ship to all 11 Newark ZIP codes (19702, 19711, 19712, 19713, 19714, 19715, 19716, 19717, 19718, 19725, 19726). Order by 1 PM CST and it ships same day, tracked.

The practical point: a homeowner sprayer that will not prime is almost never beyond saving — and the parts are cheaper than a replacement by a wide margin.

Fast Shipping
Dispatch on orders before 1 PM CST
100% OEM
Genuine Graco, never aftermarket
Shared Kits
X5 and X7 pump kit in common
11 ZIPs
Covered in Newark alone

Serving Delaware Homes and Workshops

For Newark, Delaware painting contractors, equipment reliability directly affects project schedules and profitability. A worn pump packing, a clogged filter, or a damaged spray tip can stop a crew in its tracks. Stocking a few key Graco OEM replacement parts prevents that scenario. Painters in Newark, Delaware can rely on Sprayersandparts.com for consistent inventory, genuine Graco quality, and shipping they can track. Order today and have your parts in hand before your next job.

Give us the number on the data plate and we will match the right component. We are an online supplier rather than a walk-in store, so we carry legacy numbers most dealers drop.

Delaware painters rely on Sprayers and Parts for authentic Graco sprayers, guns and replacement components. Orders go out daily to 6 Delaware locations, including Bear, Dover, Glasgow.Running online instead of a storefront lets us hold stock most local suppliers cannot justify, right down to obsolete components for older machines still earning their keep. Orders placed before 1 PM CST ship the same business day, with tracking on every parcel.

Every Delaware order ships from the same warehouse on the same schedule.

Working outside Newark? Browse every Delaware city we ship to to find your area.

Find Us on Google

See our reviews, hours and contact details on our Google Business Profile — then order online for delivery to Newark.

View Our Google Profile
+1 713-931-4102
Fast shipping to Newark 19702

What Professionals Say

Verified reviews from contractors and industrial finishers who rely on genuine Graco parts.

4.8
838 reviews
5★
81.5%
4★
18.5%
3★
0%
2★
0%
1★
0%
SS
“The 195516 Spacer (Part #195516) - the machine was back up and running the same day. Good value for a genuine Graco part.”
Verified Buyer · Part #195516
“Grabbed one of these on a recommendation, and this 198841 Press Bypass Ball Retainer and it matched the original spec exactly, down to the part number. Part #198841 matched exactly. No issues at all - does exactly what it should.”
Verified Buyer · Part #198841
“This was a straightforward swap - for the 16N231 Kit, Seal Set, U-Cup, 75Cc (Part #16N231) and it solved the issue we were having right away. Easy to order once I had the part number from the diagram.”
Verified Buyer · Part #16N231
“The 120724 Pan Head Torx Tapping Screw (Part #120724) - it's holding up well after regular use on the job. Good value for a genuine Graco part.”
Verified Buyer · Part #120724
“Needed this fast for an active job site - this 198921 Label, Instruction and the machine was back up and running the same day. Part #198921 matched exactly. Good value for a genuine Graco part.”
Verified Buyer · Part #198921
“Bought this after the original wore out, and this 196750 Retaining Spring and it's holding up well after regular use on the job. Part #196750 matched exactly. Will be ordering more parts from here.”
Verified Buyer · Part #196750
Your Cart
No items in cart.
Add more items
Total 0
Checkout Modify Cart